need some measurements...
08-01-2007, 03:36 AM
#1
Junior Member
Thread Starter
Join Date: Dec 2004
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
need some measurements...
Building my D15B7, I need to know:
1. What the bore size is...
2. What the rod length is...
3. What headgasket to use for high compression(10.5-11.5:1)...
4. What cam gear to use for D16A6 cam or BISImoto level 2 regrind in D15B7 head...
5. What the main bearing and rod bearing sizes are...
I know thats alot of questions but I want to get the ball rollin' on my build. I'm also gonna buy a si tranny and install a 4.75:1 final drive gear too. Thanks for the help in advance.
1. What the bore size is...
2. What the rod length is...
3. What headgasket to use for high compression(10.5-11.5:1)...
4. What cam gear to use for D16A6 cam or BISImoto level 2 regrind in D15B7 head...
5. What the main bearing and rod bearing sizes are...
I know thats alot of questions but I want to get the ball rollin' on my build. I'm also gonna buy a si tranny and install a 4.75:1 final drive gear too. Thanks for the help in advance.
08-01-2007, 03:53 AM
#2
Member
Join Date: Mar 2007
Location: Eastern, Ma, USA
Posts: 1,701
Likes: 0
Received 0 Likes
on
0 Posts
08-01-2007, 02:29 PM
#4
Junior Member
Thread Starter
Join Date: Dec 2004
Posts: 111
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Mista Bone)
probably gonna be my D15B7 cam, but I'm talking to a guy over on d-series.org about his buddies D16a6 cam for $30...so I might send that one to mr. bisi.
Thread
Thread Starter
Forum
Replies
Last Post
abmerop18
Tech / Misc
4
01-06-2006 05:10 PM