SprayinCX

i have been reading mini me threads for a hour. there is a few questions that havent really been answered.

if you are doing this "mini me" swap in a 96-00ex and you use a d15b7 will the stock e mount fit on the d15b7 block?

will you still use a d16y8 timing belt or do you need to buy a z6 one?

will you use all of the d15b7 headbolts? (someone said all but 1, i have no idea why)

where would be a good place to locate the knock sensor on the block?

i think this is all of the questions i have. for everyone wanting to know i have a 99 civic ex. it spun a rod bearing the other day. i have a spare d15b7 block. i was wondering if someone already knew the answers these questions before i take all this stuff apart and waste alot of time. this is my dd thats why i dont have the time to do all the matching up myself.

VRD^sam

https://honda-tech.com/forums/honda-civic-del-sol-1992-2000-1/%5Bfaq%5D-d16y7-y8-mini-me-write-up-pics-56k-maybe-not-735196/

1. You can swap over your mounts to the B7 block.
2. You can use a Y8 belt. *I believe the Y8 and Z6 timing are the same.*
3. You'll need new Y8 head bolts or Studs

1turbodeg

u can use the z6 timing belt.....with the others u will have timing issues....u can use the z6 head bolts also