►► ALL MOTOR classifieds ►►
#26
Honda-Tech Member
iTrader: (1)
Join Date: Aug 2007
Location: Norcal, usa
Posts: 620
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
FS
Parting my all motor
B16b long block (271 whp)
14:1 arias pistons
gsr length eagle rods
acl bearing
cc cylinder cnc ported (flows over 300cfm)
1mm intake/.5 exhaust valves
supertech retainers,dual springs, and guilds
skunk2 stg3 pro series cams
will include 4 Bosch 660 injectors
asking 3500 obo local pick up only
BMC 4.5L gsr intake manifold w/ 75mm accufab TB
asking 600 obo + shipping
the skunk2 manifold is not fs
Parting my all motor
B16b long block (271 whp)
14:1 arias pistons
gsr length eagle rods
acl bearing
cc cylinder cnc ported (flows over 300cfm)
1mm intake/.5 exhaust valves
supertech retainers,dual springs, and guilds
skunk2 stg3 pro series cams
will include 4 Bosch 660 injectors
asking 3500 obo local pick up only
BMC 4.5L gsr intake manifold w/ 75mm accufab TB
asking 600 obo + shipping
the skunk2 manifold is not fs
Last edited by 209lsr_ly; 12-17-2013 at 12:36 PM.
#27
Honda-Tech Member
Join Date: Mar 2007
Location: NY
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
FOR SALE: injector dynamics 725cc injectors comes with top hats. Only used for 1 full season. Only ran q16 on these and always drained fuel system after each event. Im asking $400. I am located in long island, NY near green acres mall and jfk airport. I can be reached at 516 342 0318. I can ship as well at buyers expense ...+3% if paypal ...
#28
Honda-Tech Member
Join Date: Mar 2007
Location: NY
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
I have for sale a full set of skunk 2 pro series dual valve springs/ retainers/ and keepers for B OR H series. I live in long island ny near green acres mall and jfk airport. im asking $450 and i can be reached at 516 342 0318
#30
Re: ►► ALL MOTOR classifieds ►►
BNIB B18c CP Pistons part number #SC7116X. Includes wrist pins, ring set and locks. 81.5mm bore, 12.5:1 compression with lightweight "x" forging option. Piston only weights 260 grams. These are great for someone looking to do a stock sleeve B18c/B18b n/a build. $505.00 shipped in the 48 states. Price is firm, not looking for trades. Please PM or email sales@evans-tuning.com for questions or to purchase.
#31
Honda-Tech Member
Join Date: Mar 2002
Location: Anaheim, CA, USA
Posts: 6,093
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
Had a customer bail on this B20 engine. Benson sleeved block with fresh hone, used JE pistons in fine condition. 86.5mm 13.5-1 comp with gas ports. Pistons had undermill work and 17mm wrist pins to save weight. Eagle rods and acl/king bearings. All fresh and ready to go. First $2000 takes it.
#37
Honda-Tech Member
Join Date: Nov 2005
Location: Harrisburg, PA
Posts: 872
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
Up for sale is my Rosko Racing ported and polished Euro-R H22 intake manifold with RDX injectors and fuel rail
This manifold has all the goodies Rosko has to offer.
EGR Plate
EGR block off
Threaded IAT sensor
Throttle Cable Bracket
Ported and Polished
Bored for 68mm Throttble boddy
RDX Injectors
Rosko Racing RDX fuel rail
Fuel Pressure Gauge
IACV adapter
IACV
Looking for $800 Shipped
This manifold has all the goodies Rosko has to offer.
EGR Plate
EGR block off
Threaded IAT sensor
Throttle Cable Bracket
Ported and Polished
Bored for 68mm Throttble boddy
RDX Injectors
Rosko Racing RDX fuel rail
Fuel Pressure Gauge
IACV adapter
IACV
Looking for $800 Shipped
#40
Honda-Tech Member
iTrader: (2)
Re: ►► ALL MOTOR classifieds ►►
B18A1 81mm STD Bore. Fresh hone from machine shop. Rotating assemble consist of;
New Manley H-beam rods w/ ARP 2000 3/8's rod bolts. New Arias forged high compression piston 12.5-1 ratio. All the bearings used were New ACL Race; main, rod, thrust washer. New OEM GSR Oil Pump. Assembled and ready to go.
$1500 picked up or $1650 shipped.
New Manley H-beam rods w/ ARP 2000 3/8's rod bolts. New Arias forged high compression piston 12.5-1 ratio. All the bearings used were New ACL Race; main, rod, thrust washer. New OEM GSR Oil Pump. Assembled and ready to go.
$1500 picked up or $1650 shipped.
#41
Honda-Tech Member
Join Date: Oct 2002
Location: pittsburg ca (925)
Posts: 526
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
B-series golden eagle main girdle comes with mainbolts and dowel brand new torque once to try it on... b18/b20/b16
$230 shipped and paypal fee included
Call or text for pictures 925-325-5005
$230 shipped and paypal fee included
Call or text for pictures 925-325-5005
#42
Honda-Tech Member
iTrader: (13)
Join Date: May 2012
Location: Paratrooper HQ
Posts: 994
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
couple thing im looking to get rid of.
pm questions
all prices reflect shipped price to 48 CONUS ( this is because I hate when you wanna buy something and someone gives oyu a bullshit price to ship)
Everything I ship is USPS tracked this is because they are cheaper than UPS and fedex by as much as 50%
trades welcome looking for SFWD intercooler
skinny 4x100
PNP pr3 head
hondata CPR
G force harness
please note I am not machine shop.
if my post is confusing then please pm me or text me.
205 three 83 78 four 7
b18B crankshaft was pulled form a running motor. all journals look good.
INCLUDED IS THE GEAR NUT AND KEY TO INSTALL THE CRANK PULLEY. THIS IS NOT ALWAYS THE CASE WHEN YOU BUY OTHER CRANKSHAFTS THEN YOU ARE SEARCHING FOR PARTS. $200 SHIPPED WITH ALL LISTED
ITR HARMONIC BALLANCER $40 WITH PURCHASE $60 WITHOUT
b18C1 BARE BLOCK (this mean the block and the caps and gridle with oem bolts manin seal plate) this motor is stock bore or so im told but looks as such and measures right. I also have all the bolts for the attachments like water pump oil pump and most of the other stuff. this is so you don't have to spend $80 at Honda to get the bolts to put your block together.
could use a hone/line hone deck surface looks good
$300 shipped for all above listed
$430 shipped all above plus ( water pump oil pump oil pan windage tary oil pick up water tube and thermo housing pcv box ITR crank pulley oil pan. this would be a great set up!!!) pretty much everything you need except rods and pistons. all the bolts
PR3 cam gears painted black $20 shipped
pcv box $25 shipped
P72 oil pan small dent will come with gasket over all good condition $70 shipped
b18C windage tray and oil pick up. excellent condition $50 shipped
used oil pump b18C it works $40 shipped
b18c water pump it works spins free $20
motor mounts 160 shipped
ITR crank pully harmonic $60 shipped 40 with crank
pm questions
all prices reflect shipped price to 48 CONUS ( this is because I hate when you wanna buy something and someone gives oyu a bullshit price to ship)
Everything I ship is USPS tracked this is because they are cheaper than UPS and fedex by as much as 50%
trades welcome looking for SFWD intercooler
skinny 4x100
PNP pr3 head
hondata CPR
G force harness
please note I am not machine shop.
if my post is confusing then please pm me or text me.
205 three 83 78 four 7
b18B crankshaft was pulled form a running motor. all journals look good.
INCLUDED IS THE GEAR NUT AND KEY TO INSTALL THE CRANK PULLEY. THIS IS NOT ALWAYS THE CASE WHEN YOU BUY OTHER CRANKSHAFTS THEN YOU ARE SEARCHING FOR PARTS. $200 SHIPPED WITH ALL LISTED
ITR HARMONIC BALLANCER $40 WITH PURCHASE $60 WITHOUT
b18C1 BARE BLOCK (this mean the block and the caps and gridle with oem bolts manin seal plate) this motor is stock bore or so im told but looks as such and measures right. I also have all the bolts for the attachments like water pump oil pump and most of the other stuff. this is so you don't have to spend $80 at Honda to get the bolts to put your block together.
could use a hone/line hone deck surface looks good
$300 shipped for all above listed
$430 shipped all above plus ( water pump oil pump oil pan windage tary oil pick up water tube and thermo housing pcv box ITR crank pulley oil pan. this would be a great set up!!!) pretty much everything you need except rods and pistons. all the bolts
PR3 cam gears painted black $20 shipped
pcv box $25 shipped
P72 oil pan small dent will come with gasket over all good condition $70 shipped
b18C windage tray and oil pick up. excellent condition $50 shipped
used oil pump b18C it works $40 shipped
b18c water pump it works spins free $20
motor mounts 160 shipped
ITR crank pully harmonic $60 shipped 40 with crank
Last edited by $MIKE$; 01-19-2014 at 01:06 PM.
#43
Re: ►► ALL MOTOR classifieds ►►
PLEASE KEEPED BUMPED. THANK YOU.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $2500 O.B.O + SHIPPING AND PAYPAL FEES. NOTICE I SAID O.B.O(WHICH MEANS I AM WILLING TO LISTEN TO PRICES)
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG][/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
OK, where to start. First and foremost If you have any and I mean any questions just shoot me a PM or EMAIL to my gmail, Salicea11.9@gmail.com
Either or is fine, I constantly check it.
I have a custom 86.5 X 92 lightweight stroker kit consisting of lightweight short skirt pistons/lightweight long rods/ and lightweight crank.
The pistons and rods are brand new never used purchased from TB Motorwork. They are Wiseco Pistons and Crower MAXI-LIGHT RODS.
The crank is a 92 mm lightweight scat crank. Purchased from Nick Arias over at Atomic speedware.
Reason I am selling is because I have no use for it. I am in school full time and not working so putting something together of this nature is out of the question.
I payed $2000 for the Pistons and rods.
For the crank I cant remember too well but I have searched online and they have fluctuated between $839.15 to 924.80. REMINDER I ONLY USED MY CRANK FOR NO MORE THAN 50 MILES.
I AM LOOKING TO GET $2500 O.B.O + SHIPPING AND PAYPAL FEES. NOTICE I SAID O.B.O(WHICH MEANS I AM WILLING TO LISTEN TO PRICES)
FIRST WE HAVE THE PISTONS. THEY ARE WISECO 86.5 LIGHTWEIGHT WITH A SHORT SKIRT. THE COMPRESSION WITH A B16 HEAD WOULD BE AROUND 15.8 TO 16.5 DEPENDING ON OTHER FACTORS.
[IMG][/IMG]
UP NEXT ON THE LIST ARE THE RODS. THEY ARE CROWER MAXI-LIGHT RODS.
NOW WE HAVE THE CRANK. THE CRANK I USED ON MY OLD SETUP WHICH WAS RAN FOR LESS THAN 50 MILES. CAR WAS USED ONLY AT THE TRACK. IT IS A 92MM LIGHTWEIGHT SCAT CRANK. IT WEIGHS 29LBS.
LIKE STATED ABOVE, IF YOU HAVE ANY AND I MEAN ANY QUESTION JUST SHOOT ME A EMAIL OR PM.
#44
Honda-Tech Member
iTrader: (1)
Join Date: Dec 2001
Location: Somewhere withing the 5 boroughs, NY, USA
Posts: 913
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
Selling for a friend a custom B series Myers Competition header. Asking $1000 obo buyer pays shipping and 4% PayPal fees unless you send it as a gift
Pm me or text me for inquiries 7184136348
Here is a dyno graph of what it made
Pm me or text me for inquiries 7184136348
Here is a dyno graph of what it made
#45
Honda-Tech Member
Join Date: Sep 2008
Location: Raleigh, nc, US
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
Skunk 2 - pro+ 3 camshafts only. For H-series.
Perfect condition - like new.
Only ran 4 passes and a few dyno pulls. Purchased bnib from skunk. They were almost $800 after shipping. These will make GOOD power gains on stock valve 13:1 or higher H-series .
Reason selling: too big for my compression setup.
Price: $550 shipped or best offer. Motivated seller .
Location : NC 28086
Cam gears Not included.
Will trade for pro + 2's or jun 3's or similar spec cam.
Perfect condition - like new.
Only ran 4 passes and a few dyno pulls. Purchased bnib from skunk. They were almost $800 after shipping. These will make GOOD power gains on stock valve 13:1 or higher H-series .
Reason selling: too big for my compression setup.
Price: $550 shipped or best offer. Motivated seller .
Location : NC 28086
Cam gears Not included.
Will trade for pro + 2's or jun 3's or similar spec cam.
Last edited by revn9k; 02-03-2014 at 10:00 PM.
#46
Honda-Tech Member
Join Date: Sep 2008
Location: Raleigh, nc, US
Posts: 154
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
Mickey Thompson slicks 24.5/9-13.
Looking for m&h in same size.
Great shape. 8 passes.
$320 + shipping.
More pics avail. Revn9k@hotmail.com
Looking for m&h in same size.
Great shape. 8 passes.
$320 + shipping.
More pics avail. Revn9k@hotmail.com
#49
Honda-Tech Member
Join Date: Mar 2007
Location: NY
Posts: 1,332
Likes: 0
Received 0 Likes
on
0 Posts
Re: ►► ALL MOTOR classifieds ►►
FOR SALE: brand new K-series injector dynamics 1000cc injectors. Will also work for B series or H series just need a top hat. Im located in valley stream NY near JFK airport and can be contacted at 516 342 0318. I have paypal and will ship at buyers expense.