280 psi is ok for H22A4 with oversize Type S pistons?
04-16-2004, 03:21 AM
#1
Thread Starter
Join Date: Mar 2004
Location: Panama, Panama
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
280 psi is ok for H22A4 with oversize Type S pistons?
It is ok reading 280 psi for a rebuild H22A4 with oversize Type S pistons?
The engine have no modifications to the block, the head has not been milled, stock head gasket, stock valves.
Any help is appreciated.
The engine have no modifications to the block, the head has not been milled, stock head gasket, stock valves.
Any help is appreciated.
04-16-2004, 10:35 AM
#3
Thread Starter
Join Date: Mar 2004
Location: Panama, Panama
Posts: 12
Likes: 0
Received 0 Likes
on
0 Posts
Re: 280 psi is ok for H22A4 with oversize Type S pistons? (95PRELUDEVTEC206)
So it is normal to get this reading for Type S pistons?
i was worried about it, because my car is a daily driver.
So i even get away with a nitrous shot for the drag strip.......
i was worried about it, because my car is a daily driver.
So i even get away with a nitrous shot for the drag strip.......
Thread
Thread Starter
Forum
Replies
Last Post
