rear upper control arm bushings
#1
rear upper control arm bushings
It looks like I have adjustable camber upper rear control arms on my 03 Ep3. The bushings are shot. How do I replace the bushings? I don't know what arms they are.
Or do I just put new arms on and not worry about replacing the bushings? I've never used these before and don't even know how to adjust them. Any suggestions would be great.
Arms look similar to this one in the pic
Or do I just put new arms on and not worry about replacing the bushings? I've never used these before and don't even know how to adjust them. Any suggestions would be great.
Arms look similar to this one in the pic
#6
Honda-Tech Member
Re: rear upper control arm bushings
Do you know what brand of camber arms you have on the RSX ? Once you know what you have, you could contact the manufacturer to see if you can get the bushings only.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post
AZ-Accord
Honda Accord & Crosstour (2003 - 2012)
3
01-09-2013 05:23 PM
brokenojoke
Honda CRX / EF Civic (1988 - 1991)
4
06-29-2004 12:27 PM