nsxxtreme

I am looking to buy new rims for my NSX. I cant seem to find any I like. I found some once then forgot the name of them . I would like to see some NSX with rims please. Thank You.

laseca

There's a thread in the S2000 forum on NSX wheels that begun prior to the NSX getting its own forum. Check there.

Check this link below for more NSX with aftermarket wheels:
http://northwest.nsxca.org/nsxpo99.html

I don't know who the manufacturers of the wheels are. An NSX owner at NSXPO '99 gave me the photos to post on our club website.

nsxxtreme

Yes I know about the thread in the S2000 Forum. I figured I would start a new thread in here rather than hijack their Forum. Someone posted a pic of some rims that I liked. I asked what they were and they responded, I can't find that thread anywhere. So I am hoping it will appear again. It is none of the ones in the S2000 Forum.

This Forum doesn't allow you to do a search by you user name Only goes back 15 days.

Thanks.

nsxtasy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxxtreme &raquo;</TD></TR><TR><TD CLASS="quote">I would like to see some NSX with rims please.</TD></TR></TABLE>

http://www.nsxprime.com/FAQ/Ti...y.htm

supergreenNA1

there... killed 4 birds with one stone.

azn98R

ehhh still like the stocks imo

Mr.Integra

i saw a black nsx with like 18 rear 17 front with gunmetal te37 rims.. hella nice..

Mr.Integra

imo, nsx with Advan Model 6's would look very nice.. sorry, no pics though

nsxxtreme

Thank you supergreen

nsxtacy, thanks but I have seen those as well.

vtec65

From the nsxprime limk above..

Ponyboy

Volk TE37's.

Knightsport

Fikse FM10's....need I say more?

NightRiderS2K

This is from this one webboard:
http://pub38.ezboard.com/fswee...topic














Performance Mods:
JE - 9.5:1 Pistons
ARP - Rod Bolts
ARP - Head Studds & Main Studs
R & D - Springs
CROWER - Titanium Retainers
Ported Heads
COMPTECH - Stainless Steel Headers
COMPTECH - High Volume Oil Pump
GARRET - TO4E Turbo
TURBONETICS - Wastegate
HKS - Race Blow Off Valve
APEXi - Intercooler
APEXi - AVC-R Boost Controller
APEXi - Turbo Timer
ELECTROMOTIVE - Tech 2 Engine Management
TILTON - Scavenge Pump
B&M - Oil Cooler
SYSTEM ONE - Fuel Filter
DENSO - Race Fuel Pump
NOS - Fuel Pressure Regulator
BOSCH - 680CC Injectors
MOROSO - Catch Can
Custom Stainless Exhaust
MAGNACORE 8.5mm Spark Plug Wires

Suspension/Brakes:
KONI Adjustable Struts with Ground Control Adjustable Suspension
GOODRIDGE Steel Braided Brake Lines
POWERSTOP Rotors
AXXIS Metal Master Pads
DC - Carbon Fiber Rear Strut Bar

Interior Mods:
Custom Brushed Aluminum Instrument Cluster
SPARCO Torino Seats
ZANARDI - Floor Mats
MOMO - Carbon Fiber Steering Wheel
MOMO - Carbon Fiber Shift ****

Exterior/Body Mods:
WINGS WEST - Side Skirts
WINGS WEST - Rear Wing
WINGS WEST - Front Lip
Custom Lexan Hatch & Scoop

Wheels/Tires:
WORK EQUIP 19X10 - Rear & 18X8 - Front Wheels
BRIDGESTONE SO3S 275/30-19 - REAR
BRIDGESTONE SO3S 225/35-18 - FRONT


Videos:
500hp NSX cruising around
http://www.racingflix.com/downloadvideo.asp?v=5
NSX at the strip
http://www.racingflix.com/downloadvideo.asp?v=8
NSX at the strip (camera 2)
http://www.racingflix.com/downloadvideo.asp?v=9

Sorry if its a repost...

nsxxtreme

I still would like to know where the muffler goes on this car.

tanman

This looks very agressive

JUN JDM

Damn you got a bad *** NSX.....love the turbo..and love how u got the scoop for the intercooler!

D'Ecosse

It pretty much goes in the stock location - it's not mounted in the picture, but you can see where it connects to the output of the turbo in this pic. This one has a single exit exhaust, exiting on the left side of the car.



On Brian's yellow (also built by Gerry Johnson) the configuration is slightly different, allowing for a more traditional twin exit exhaust, as well as locating the intercooler just in front of the rear valance, rather than on top of the motor. Brian has developed enhanced cooling on this by incorporating electric fans to pull cool air through it.



OK - this has nothing to so with wheels, but you asked about the exhaust .........

M-Type

one of my fav nsx

NSX Tech

Hey thanks for posting the photos of the car ... website for it is at http://www.pansx.com ...

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by NightRider-gsR &raquo;</TD></TR><TR><TD CLASS="quote">This is from this one webboard:
http://pub38.ezboard.com/fswee...topic
..</TD></TR></TABLE>

This person has it posted as twin turbo the car is single turbo .... If you have any Q's about the car's I'll be happy to help ....

D'Ecosse Thank you for posting the photos hope to see you again some time soon .......

nsxxtreme

Any more photos of this car?

JUN JDM

damn thats my favorite NSX....that i've seen so far!

ITRbroham

Tanman,

Where are the pics of your NSX?

EJ8 Kenobi

deep dish's look the best in the rear!

NSX Tech

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxxtreme &raquo;</TD></TR><TR><TD CLASS="quote">Any more photos of this car?
</TD></TR></TABLE>

Well if your talking about the red one I counld have the owner come down or next time I see him I'll Take a few photo's of his car for you guys .....

tanman

Here are my pics.



Tan