Nsx engine in a Accord
#29
GDD Member
iTrader: (1)
Re: Nsx engine in a Accord (HFCRexer88)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by HFCRexer88 »</TD></TR><TR><TD CLASS="quote">ahahah well if you can make an Accord an MR sure why not? but seriously, no, no, you cant </TD></TR></TABLE>
Dude, you are like the only one who doesn't get it. Put an NSX engine in the FRONT of an accord, that's what we're talking about. Even if somebody wanted to do an MR Accord, who says that's not possible? You? Look here, https://honda-tech.com/zerothread?id=981613 . This guy did it with an H22 and an integra, i'm sure someone else could do it in an accord.
Guys like you are bandwagon racers, you do what has already been done, without pioneers with innovative ideas, we'd all be on stangnet right now debating on whether or not we should get 3.73's or 4.11 gears and which imitation Cobra R rims look the best.
Dude, you are like the only one who doesn't get it. Put an NSX engine in the FRONT of an accord, that's what we're talking about. Even if somebody wanted to do an MR Accord, who says that's not possible? You? Look here, https://honda-tech.com/zerothread?id=981613 . This guy did it with an H22 and an integra, i'm sure someone else could do it in an accord.
Guys like you are bandwagon racers, you do what has already been done, without pioneers with innovative ideas, we'd all be on stangnet right now debating on whether or not we should get 3.73's or 4.11 gears and which imitation Cobra R rims look the best.
#32
Re: Nsx engine in a Accord (satan_srv)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by satan_srv »</TD></TR><TR><TD CLASS="quote">nsx head banks are tall and wide compared to most Honda V-6 motors, good luck fitting it into front of an Accord!</TD></TR></TABLE>
Is already been done, althought with a huge cost of like 17k.
Is already been done, althought with a huge cost of like 17k.
#34
Honda-Tech Member
Join Date: Feb 2003
Location: Searching...
Posts: 5,643
Likes: 0
Received 0 Likes
on
0 Posts
Re: Nsx engine in a Accord (slomofo)
Yeah, for maybe 200k. Signal Auto had an EK w/ a NSX motor in late 99/00. Remember their old chop-top that orginally had a turbo b16b? After maxing that motor out they decided to try the C motor. Don't know what ever became of it.
#35
Honda-Tech Member
Re: Nsx engine in a Accord (C-speed Ricer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by C-speed Ricer »</TD></TR><TR><TD CLASS="quote">Yeah, for maybe 200k. Signal Auto had an EK w/ a NSX motor in late 99/00. Remember their old chop-top that orginally had a turbo b16b? After maxing that motor out they decided to try the C motor. Don't know what ever became of it.</TD></TR></TABLE>
It ran at Nopi St Louis last year because i saw it there. I have some videos but it really wasn't that fast if i remember right (well, comparatively).
It ran at Nopi St Louis last year because i saw it there. I have some videos but it really wasn't that fast if i remember right (well, comparatively).
#37
I personally would not waste money on a project like this but if you have the money and time so be it and as far as 18k nsx's and 1k nsx motors that is either very rare or non existent.....unless the car or motor is so shotty I dont see that happening....... nsx motors are always in demand from other nsx owners who track their cars or would like to have one as a spare and they usually go for about $5500 used in good condition with low miles. As a nsx owner I should know. Good luck to whoever is going to do that.
#39
the DOHC NSX motor is HUGE compared to the SOHC accord engine.
that and the accord uses J series V6's whereas the NSX is a C32B. The C series motors (in legends, RLs, and first gen TLs) is a 90 degree V6, whereas the J series is a 60 degree V6.
i would almost bet the NSX motor is nearly a foot wider than the 3.0 L accord V6
that and the accord uses J series V6's whereas the NSX is a C32B. The C series motors (in legends, RLs, and first gen TLs) is a 90 degree V6, whereas the J series is a 60 degree V6.
i would almost bet the NSX motor is nearly a foot wider than the 3.0 L accord V6
#41
Re: (898civichatch)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 898civichatch »</TD></TR><TR><TD CLASS="quote">yes its very possible!</TD></TR></TABLE>
yes you are a moron!
yes you are a moron!
#45
Honda-Tech Member
Re: (ojas)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ojas »</TD></TR><TR><TD CLASS="quote">Hi.
Can you put an Accord engine in a 91 NSX?</TD></TR></TABLE>
How about a civic motor? Or how about an Integra motor? Don't laugh because I know someone from this board is doing the later.
Can you put an Accord engine in a 91 NSX?</TD></TR></TABLE>
How about a civic motor? Or how about an Integra motor? Don't laugh because I know someone from this board is doing the later.
#46
Join Date: Jun 2002
Location: Lisboa, Lisboa, Portugal
Posts: 129
Likes: 0
Received 0 Likes
on
0 Posts
Re: (nsxxtreme)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxxtreme »</TD></TR><TR><TD CLASS="quote">
Don't laugh because I know someone from this board is doing the later.</TD></TR></TABLE>
please tell me that's not true.....please......
Don't laugh because I know someone from this board is doing the later.</TD></TR></TABLE>
please tell me that's not true.....please......
#47
Honda-Tech Member
Join Date: Oct 2000
Location: Yokohama, Japan, Japan
Posts: 7,810
Likes: 0
Received 0 Likes
on
0 Posts
Re: (goowakjai)
yeah...whatever troll boy!
You
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goowakjai »</TD></TR><TR><TD CLASS="quote">heh heh, top fuel(*******, correct me again and die!) </TD></TR></TABLE>
You
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goowakjai »</TD></TR><TR><TD CLASS="quote">heh heh, top fuel(*******, correct me again and die!) </TD></TR></TABLE>
#49
Honda-Tech Member
Join Date: Oct 2000
Location: Yokohama, Japan, Japan
Posts: 7,810
Likes: 0
Received 0 Likes
on
0 Posts
Re: (goowakjai)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goowakjai »</TD></TR><TR><TD CLASS="quote">
i dunt get it </TD></TR></TABLE>
:smirk:
i dunt get it </TD></TR></TABLE>
:smirk:
#50
Re: (goowakjai)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by goowakjai »</TD></TR><TR><TD CLASS="quote">with enough time and money anything can be done...u guys seen the top secret MR B18 powered del sol??</TD></TR></TABLE>
anything CAN be done, but what is the POINT when you are spending that much money. You would have to lengthen the frame of the car, or extend the front end. THE MOTOR WONT FIT. there isnt enough room between the firewall and the radiator supports.
buy a new car, preferably a RWD one
anything CAN be done, but what is the POINT when you are spending that much money. You would have to lengthen the frame of the car, or extend the front end. THE MOTOR WONT FIT. there isnt enough room between the firewall and the radiator supports.
buy a new car, preferably a RWD one