Need opinions on my 1/4 times
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Miami, FL, USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Need opinions on my 1/4 times
I've run my ITR 7-8 runs now at Moroso and so far my best time is only 14.585 95.36mph. The 60ft was 2.394 that night I backed it up with 2 more 14.6 and about the same 60fts. My guess is that if I get the 60's down to like 2.1's I'm looking at 14.1-14.2's any opinions or comments welcome. Still haven't gotten to the dyno have no tuning done yet with my Toda A's so power is bound to improve later.
#4
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Miami, FL, USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need opinions on my 1/4 times (Dropspeed)
Yeah its what i figured will try for this week at least its not any slower and with those 60 ft's its not to bad. This week or next I promise
#5
Honda-Tech Member
Join Date: Apr 2001
Location: Santas Neighbor, Canada
Posts: 4,266
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need opinions on my 1/4 times (integratom)
I'd be happy if I ran that time with my ITR at my local drag strip.
Elevation
Track older than me with no regular maintenance
[Modified by Tommy_Gunns, 9:50 PM 5/20/2002]
Elevation
Track older than me with no regular maintenance
I've run my ITR 7-8 runs now at Moroso and so far my best time is only 14.585 95.36mph. The 60ft was 2.394 that night I backed it up with 2 more 14.6 and about the same 60fts. My guess is that if I get the 60's down to like 2.1's I'm looking at 14.1-14.2's any opinions or comments welcome. Still haven't gotten to the dyno have no tuning done yet with my Toda A's so power is bound to improve later.
[Modified by Tommy_Gunns, 9:50 PM 5/20/2002]
Trending Topics
#8
Honda-Tech Member
Join Date: Dec 2000
Location: Found On Road Dead., usa
Posts: 3,266
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need opinions on my 1/4 times (JohnnyBoy)
With a 2.30 60ft I went 14.1@100 with just an intake and header in my ITR.Honestly,I would be dissapointed with that time and those mods.
#10
New User
Join Date: May 2001
Location: Southern MD, USA
Posts: 1,484
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need opinions on my 1/4 times (Black SVT)
With a 2.30 60ft I went 14.1@100 with just an intake and header in my ITR.Honestly,I would be dissapointed with that time and those mods.
#11
Honda-Tech Member
Thread Starter
Join Date: Jan 2000
Location: Miami, FL, USA
Posts: 155
Likes: 0
Received 0 Likes
on
0 Posts
Re: Need opinions on my 1/4 times (Dropspeed)
Thanks and I know tune I just need to get the time togther with the money at the same time. And to be honest only been to the track 3 times and each time I was there there were 1 or 2 other ITR's running 1 stock or maybe just bolt ons and the best i've seen was 14.9 or so one of them could break into the 14's just low 15's. Remember the track is pretty much in the everglades and this is south florida last time there humidity was like 80-90% and like high 80's to 90deg. Combine all that and my sucky 60ft and I'm not that depressed. And I've run 2 other R's from a roll so the lauch doesn't affect it and I easily walked on them in 2nd through 3rd, and one of them I know is a friend of mines has Ingen CAI, DC 4-1 USDM, DC Catback, and its no big deal I pull on him just fine. Well before I do the track again I'm going to dyno this sucker and see whats going on. Thanks for a the replies.
Thread
Thread Starter
Forum
Replies
Last Post
uncleben
Road Racing / Autocross & Time Attack
16
05-13-2002 08:37 PM