EG6-DC2

Well, Saturday I made a short 5+ hour drive down to one of the best shops w/ one of the greatest tuners on the East Coast! P1. I went down there to get my car finished tuning. I would like to thank Jack again! As my car feels alot more responsive with more usable midrange power.

Car is a '97 ITR w/ approx. 60k miles and the mods are as follows:

Toda header
T1R test pipe
Fuji RM01A exhaust
Mugen intake
Mugen HG
BC spec 3+ cams
Spoon Cam gears
Apex'i Power FC

Like I said, I'm very pleased with the power. Before anyone starts saying the power looks low, be advised that Jacks Dyno reads about 15% low. And for referance, a stock 00-01 dynos out about at 140 to the wheels on his dyno and he says the 97-98's usually are a hp or two lower. Well onto the graph.



Thanks again Jack! You come highly recomended by not only me, but everyone else that I have talked to!

walker111

Nice Bout time this thread was made!

EG6-DC2

Yeah, tell me about it!

I can't wait till I get the 4.9 FD installed and really open this bish up!

Mugen Mike

Good chit

Bradstard

Nice! I miss all of the trips up to P1

canuckr

Nice..

walker111

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">Nice! I miss all of the trips up to P1 </TD></TR></TABLE>

We need to set up another meet! Mike, you in?

ZygSpeed

I'm way overdue for another trip back down to Jack's.

Need to fix the exhaust shortly first (endlinks on A-Spec bar are where the Hytech axleback would like to be).

BlueR

iTrader: (10)

167 * 1.15= 192

nice mugen intake hump also

EG6-DC2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by walker111 &raquo;</TD></TR><TR><TD CLASS="quote">

We need to set up another meet! Mike, you in? </TD></TR></TABLE>

I'm always down for going to P1. A great crowd to be around!

EG6-DC2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BlueR &raquo;</TD></TR><TR><TD CLASS="quote">167.7 * 1.15= 192.8

nice mugen intake hump also </TD></TR></TABLE>

Yeah you like that hump don't you!

I also fixed the numbers, but who is counting fractions.

EG6-DC2

Oh and just to make it known, the car still has the a/c and the p/s hooked up with belts and all still on and working at the time!

Bradstard

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by walker111 &raquo;</TD></TR><TR><TD CLASS="quote">

We need to set up another meet! Mike, you in? </TD></TR></TABLE>

I'm in!

ZygSpeed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EG6-DC2 &raquo;</TD></TR><TR><TD CLASS="quote">Oh and just to make it known, the car still has the a/c and the p/s hooked up with belts and all still on and working at the time! </TD></TR></TABLE>

I think I'll be putting the P/S back on shortly as well.
Sometimes, it comes in handy!

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">I'm in!</TD></TR></TABLE>

Sounds good, and might save on "shipping", Brad.

EG6-DC2

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">

I think I'll be putting the P/S back on shortly as well.
Sometimes, it comes in handy! </TD></TR></TABLE>

Yeah I like all the comforts!

Bradstard

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">

I think I'll be putting the P/S back on shortly as well.
Sometimes, it comes in handy!

Sounds good, and might save on "shipping", Brad.</TD></TR></TABLE>

You don't need PS!!!

I've got them ready to go out. They should be leaving tomorrow.

walker111

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by EG6-DC2 &raquo;</TD></TR><TR><TD CLASS="quote">

Yeah I like all the comforts! </TD></TR></TABLE>

poooooosay! I like ac, but dont need the belt during the winter and cooler months

ZygSpeed

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Bradstard &raquo;</TD></TR><TR><TD CLASS="quote">You don't need PS!!!</TD></TR></TABLE>

I was out at Piper Motorsports earlier today to see about a cage, pair of seats and safety equipment, for my blue CRX.

Believe it or not #450 is being turned into a show car!

Bradstard

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by zygspeed &raquo;</TD></TR><TR><TD CLASS="quote">
Believe it or not #450 is being turned into a show car!</TD></TR></TABLE>

That's better than a garage queen.

ZygSpeed

Jon D

glad to see mah parts are treating you well

Mugen Mike

Haha, it's tempting! What's the weather like down there?

walker111

I dont know about P1 but its chilly in VA....probably shorts weather for joo guys..

Mugen Mike

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by walker111 &raquo;</TD></TR><TR><TD CLASS="quote">I dont know about P1 but its chilly in VA....probably shorts weather for joo guys..</TD></TR></TABLE>

What do you consider "chilly?" It was 7º when I got up this morning. LOL

walker111

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Mugen Mike &raquo;</TD></TR><TR><TD CLASS="quote">

What do you consider "chilly?" It was 7º when I got up this morning. LOL</TD></TR></TABLE>

Well thats in the ******* COLD category!

Chilly is 30's