Help
Thread Starter
Honda-Tech Member
Joined: Nov 2004
Posts: 163
Likes: 0
From: Guatemala, Guatemala
Help
Hello guys, I'm a little confused, I was reading all the milled head threads that I found in the search area.
I have a JDM DC2 ITR with 11.1:1 CR and I milled the head 0.050" and put the Spoon headgasket. All said that 0.012" milled has to advanced 1 degree
So doing the math I have 0.056" (with h/gasket) milled, I have to put in the cam gears (I have Toda cam gears) intake +4.5 exhaust +4.5 to be 0,0 in the crank??? Or I'm wrong here?
I have a JDM DC2 ITR with 11.1:1 CR and I milled the head 0.050" and put the Spoon headgasket. All said that 0.012" milled has to advanced 1 degree
So doing the math I have 0.056" (with h/gasket) milled, I have to put in the cam gears (I have Toda cam gears) intake +4.5 exhaust +4.5 to be 0,0 in the crank??? Or I'm wrong here?
Honda-Tech Member
Joined: Nov 2002
Posts: 2,912
Likes: 0
From: ITR owner... round three
Re: Help (RicTRD)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RicTRD »</TD></TR><TR><TD CLASS="quote">please, somebody help...</TD></TR></TABLE>
Ok. I'll start by suggesting a title that's a little more descriptive.
Did you try asking in the "all motor" forum also?
Good luck anyhow,
-Matt
Ok. I'll start by suggesting a title that's a little more descriptive.
Did you try asking in the "all motor" forum also?
Good luck anyhow,
-Matt
Thread
Thread Starter
Forum
Replies
Last Post