FS/WTB for August
#26
Honda-Tech Member
Join Date: Dec 2000
Location: On the hudson, NY
Posts: 1,571
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (Reid)
T1R 65mm cat-back exhaust -$400 - rather not ship due to it's size - located in Westchester County, NY for pick-up or in the area drop-off
Modified by R1366 at 5:47 PM 8/4/2007
Modified by R1366 at 5:47 PM 8/4/2007
#27
Junior Member
Join Date: Mar 2005
Location: H2O, CT, UnitedStates
Posts: 395
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (R1366)
WTB---------- - - - - -------------- - - ---------
OEM itr rear valances/skirts
JDM itr window switches, motors, door harnesses
JDM sun visors
JDM bumper pole
FOR SALE----------------- - - - - - -----------------
SHAVED JDM ITR front bumper no licence plate holder $750 shipped
ITR throttle body $140 shipped
ITR valve cover $55 shipped
ITR jdm ECU $110 shipped
4 front S2000 wheels $500 picked up in CT- 2 are mint 2 bad are the pics
4 Champ white US ITR wheels - SOLD
Buddy club spec3 cams, gears, springs $500 shipped
B18c5 block with crank, oil pump. needs to be sleeved SOLD
JDM SIR front end complete with carbon hood $1000 picked up
USDM ITR optional fog lights complete with switch/harness $200 shipped
valve cover is a little wet i hosed it off
clear coat cracks
curb. Other 2 wheels are mint, nothing wrong
ITR throtle body good TPS and MAP
complete ITR fog light setup with all wiring,plugs,relay,and switch
shaved JDM bumper, custom, im a auto body tech, and was done right
OEM itr rear valances/skirts
JDM itr window switches, motors, door harnesses
JDM sun visors
JDM bumper pole
FOR SALE----------------- - - - - - -----------------
SHAVED JDM ITR front bumper no licence plate holder $750 shipped
ITR throttle body $140 shipped
ITR valve cover $55 shipped
ITR jdm ECU $110 shipped
4 front S2000 wheels $500 picked up in CT- 2 are mint 2 bad are the pics
4 Champ white US ITR wheels - SOLD
Buddy club spec3 cams, gears, springs $500 shipped
B18c5 block with crank, oil pump. needs to be sleeved SOLD
JDM SIR front end complete with carbon hood $1000 picked up
USDM ITR optional fog lights complete with switch/harness $200 shipped
valve cover is a little wet i hosed it off
clear coat cracks
curb. Other 2 wheels are mint, nothing wrong
ITR throtle body good TPS and MAP
complete ITR fog light setup with all wiring,plugs,relay,and switch
shaved JDM bumper, custom, im a auto body tech, and was done right
#28
Kill Gil
Re: FS/WTB for August (R1366)
I hate to do this since these are some of my favorite wheels and I just acquired them, but due to my new brake setup "16 wheels will no longer clear my calipers.
First off I have a set of 16x7+43 offset Bronze CE28N's in 5x114.3. They are wrapped in 225x45 Hankook Ventus R-S2 with 80% tread life. The wheels are in clean condition and only have one minor scuff on the outside of the lip, it is shown in the picture.
Asking $1400 obo
Next off I have a set of "16x7 +43 offset Bronze TE37's in 5x114.3. I just wrapped these in very hard to get 205x50-16 Bridgestone Potenza RE540's R compound tires with 75% tread left. These wheels have no scratches or curbs, they just need a good cleaning because of a torn CV joint in one wheel and old brake dust. The wheels come with the Volk optional centercaps as well.
Asking $1300 obo
First off I have a set of 16x7+43 offset Bronze CE28N's in 5x114.3. They are wrapped in 225x45 Hankook Ventus R-S2 with 80% tread life. The wheels are in clean condition and only have one minor scuff on the outside of the lip, it is shown in the picture.
Asking $1400 obo
Next off I have a set of "16x7 +43 offset Bronze TE37's in 5x114.3. I just wrapped these in very hard to get 205x50-16 Bridgestone Potenza RE540's R compound tires with 75% tread left. These wheels have no scratches or curbs, they just need a good cleaning because of a torn CV joint in one wheel and old brake dust. The wheels come with the Volk optional centercaps as well.
Asking $1300 obo
#29
Honda-Tech Member
Join Date: Jun 2007
Location: Indio, CA, USA
Posts: 329
Likes: 0
Received 0 Likes
on
0 Posts
#32
Honda-Tech Member
iTrader: (1)
Join Date: Feb 2006
Location: NJ
Posts: 2,351
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (K20Ej1)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by K20Ej1 »</TD></TR><TR><TD CLASS="quote">WTB---------- - - - - -------------- - - ---------
OEM itr rear valances/skirts
JDM itr window switches, motors, door harnesses
JDM sun visors
JDM bumper pole
FOR SALE----------------- - - - - - -----------------
SHAVED JDM ITR front bumper no licence plate holder $750 shipped
ITR throttle body $140 shipped
ITR valve cover $55 shipped
ITR jdm ECU $110 shipped
4 front S2000 wheels $500 picked up in CT- 2 are mint 2 bad are the pics
4 Champ white US ITR wheels - SOLD
Buddy club spec3 cams, gears, springs $500 shipped
B18c5 block with crank, oil pump. needs to be sleeved SOLD
JDM SIR front end complete with carbon hood $1000 picked up
USDM ITR optional fog lights complete with switch/harness $200 shipped</TD></TR></TABLE>
i have some oem rear valences for sale and jdm itr cf door switches...pm me if youre interested in seeing some pics...
OEM itr rear valances/skirts
JDM itr window switches, motors, door harnesses
JDM sun visors
JDM bumper pole
FOR SALE----------------- - - - - - -----------------
SHAVED JDM ITR front bumper no licence plate holder $750 shipped
ITR throttle body $140 shipped
ITR valve cover $55 shipped
ITR jdm ECU $110 shipped
4 front S2000 wheels $500 picked up in CT- 2 are mint 2 bad are the pics
4 Champ white US ITR wheels - SOLD
Buddy club spec3 cams, gears, springs $500 shipped
B18c5 block with crank, oil pump. needs to be sleeved SOLD
JDM SIR front end complete with carbon hood $1000 picked up
USDM ITR optional fog lights complete with switch/harness $200 shipped</TD></TR></TABLE>
i have some oem rear valences for sale and jdm itr cf door switches...pm me if youre interested in seeing some pics...
#33
Kill Gil
Re: FS/WTB for August (JdmTypeRdc2)
FS: Carbing Type 1 strut bar for EG/EH 92-95 Civic chassis. I was using this strut bar on my DC, I also believe you can also use it on a EK chassis. The strut bar is in mint condition with no damage or scratches. The strut bar retails for $290 plus tax and shipping http://www.jhpusa.com/catalog/...=1079 .
I'm only asking $225 shipped including Paypal fees
<U>Item description</U>
The Carbing Tower Bar is a completely welded piece (no pivot points) with a 5mm thick base plate, which makes it truly functionally in reducing chassis flex. Unlike some cheap bronze imitation strut bars Carbing tower bar is constructed of A6063S aluminum for superior rigidity and light weight. The built-in brake master cylinder stopper allows the driver increased brake pedal feel which gives the driver greater control.
What I have for sale is a set, complete driver and passenger side, seat rails and brackets. The rails and brackets come complete and can be used to mount almost any bucket seat with side mounts. More,over the rails position the driver very low in a better position for racing.
The product retails at Memoryfab for $145 per side, $290 + tax and shipping
asking $225 shipped including Paypal fees
here's some pics I borrowed from their site
I'm only asking $225 shipped including Paypal fees
<U>Item description</U>
The Carbing Tower Bar is a completely welded piece (no pivot points) with a 5mm thick base plate, which makes it truly functionally in reducing chassis flex. Unlike some cheap bronze imitation strut bars Carbing tower bar is constructed of A6063S aluminum for superior rigidity and light weight. The built-in brake master cylinder stopper allows the driver increased brake pedal feel which gives the driver greater control.
What I have for sale is a set, complete driver and passenger side, seat rails and brackets. The rails and brackets come complete and can be used to mount almost any bucket seat with side mounts. More,over the rails position the driver very low in a better position for racing.
The product retails at Memoryfab for $145 per side, $290 + tax and shipping
asking $225 shipped including Paypal fees
here's some pics I borrowed from their site
#36
Honda-Tech Member
Join Date: May 2005
Location: 916ix, CA
Posts: 1,566
Likes: 0
Received 0 Likes
on
0 Posts
#37
Honda-Tech Member
Join Date: Jul 2005
Location: The Empire State
Posts: 813
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Rcp)
2000 gunmetal ITR wheels. 41k on them, no tires. Pretty good condition. Would like to trade for motor/interior parts. Will ship, or can pick it up in KCMO area.
$350.00
Modified by irishone at 5:12 PM 8/5/2007
$350.00
Modified by irishone at 5:12 PM 8/5/2007
#39
White Trash Wish Cash
Re: (JDM_Gadget)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDM_Gadget »</TD></TR><TR><TD CLASS="quote">WTB: Brand new spark plugs, spark plug wires, and fuel injector for 00 B18C1 </TD></TR></TABLE>
wrong place to post
wrong place to post
#41
Honda-Tech Member
Join Date: Nov 2005
Location: MA
Posts: 1,206
Likes: 0
Received 0 Likes
on
0 Posts
Re: (teg97)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by teg97 »</TD></TR><TR><TD CLASS="quote">FS: Work Emotion CR KAI gunmetal wheels....I have 5 brand new in box
asking $980 or best offer </TD></TR></TABLE>
Beautiful wheels... I'm guessing 17lbs ea. or so?
asking $980 or best offer </TD></TR></TABLE>
Beautiful wheels... I'm guessing 17lbs ea. or so?
#43
Member
Join Date: Oct 2005
Location: So Cal, CA, USA
Posts: 1,661
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (Reid)
FS:
2 Advan RG's
White 16x7
With slight rust on them where they bolt to the hub due to previous owner and east coast salt.
$500 Pick Up/Drop Off
$500+Shipping
1 Set of Hankook Ventus 215/45ZR16 R-S2
With about 75 - 80% Thread
$250 Pick Up/Drop Off
$250+Shipping
JDM Alex Back
$150 Pick Up/Drop Off
$150+Shipping
Civic Back Seats dont know what kind dumbass i bought the car from had them in it. $50 bucks pick up only
Paypal users please add fee's
Located In Camp Pendleton,CA Will Drop off if your within 1 1/2 to 2 hours away or you can meet up with me somewhere or just come anytime during the week to pick them up.
PICTURES WILL BE SENT VIA EMAIL FOR INTERESTED BUYERS
2 Advan RG's
White 16x7
With slight rust on them where they bolt to the hub due to previous owner and east coast salt.
$500 Pick Up/Drop Off
$500+Shipping
1 Set of Hankook Ventus 215/45ZR16 R-S2
With about 75 - 80% Thread
$250 Pick Up/Drop Off
$250+Shipping
JDM Alex Back
$150 Pick Up/Drop Off
$150+Shipping
Civic Back Seats dont know what kind dumbass i bought the car from had them in it. $50 bucks pick up only
Paypal users please add fee's
Located In Camp Pendleton,CA Will Drop off if your within 1 1/2 to 2 hours away or you can meet up with me somewhere or just come anytime during the week to pick them up.
PICTURES WILL BE SENT VIA EMAIL FOR INTERESTED BUYERS
#44
Honda-Tech Member
Join Date: Apr 2003
Location: The Bay to Sactown, CA, US of A
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (JdmTypeRdc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JdmTypeRdc2 »</TD></TR><TR><TD CLASS="quote">
i have some oem rear valences for sale and jdm itr cf door switches...pm me if youre interested in seeing some pics... </TD></TR></TABLE>
Pm'ed
i have some oem rear valences for sale and jdm itr cf door switches...pm me if youre interested in seeing some pics... </TD></TR></TABLE>
Pm'ed
#45
Honda-Tech Member
iTrader: (2)
Join Date: Mar 2004
Location: Get shot if you touch my car, USA
Posts: 278
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (K20Ej1)
I have a set of OEM rear valances for sale that are CW. These are real!!! I'll post pics if interested. $300 shipped
SOLD
Modified by jdmtodadc2 at 12:48 AM 8/6/2007
Modified by jdmtodadc2 at 2:10 PM 8/6/2007
Modified by jdmtodadc2 at 2:16 PM 8/6/2007
SOLD
Modified by jdmtodadc2 at 11:52 AM 8/21/2007
SOLD
Modified by jdmtodadc2 at 12:48 AM 8/6/2007
Modified by jdmtodadc2 at 2:10 PM 8/6/2007
Modified by jdmtodadc2 at 2:16 PM 8/6/2007
SOLD
Modified by jdmtodadc2 at 11:52 AM 8/21/2007
#46
Honda-Tech Member
Join Date: Jun 2007
Location: watching u, watch me
Posts: 2,505
Likes: 0
Received 0 Likes
on
0 Posts
i got a 2000 itr motor
skunk 2 proseries stage 2 cams
tesian springs, valves, retainers
aem cam gears
itr intake manifold and tbody
aem fuel rail
knife edged crake
balanced and blueprinted
srd underdrive pulley
all new gaskets and seals
new itr valve cover
jdm itr tranny(no grinds)
4000
stock ctr motor
no mods done to it all stock
motor tranny with everything still on it,dizzy, alt, header, ect...
3500
skunk 2 proseries stage 2 cams
tesian springs, valves, retainers
aem cam gears
itr intake manifold and tbody
aem fuel rail
knife edged crake
balanced and blueprinted
srd underdrive pulley
all new gaskets and seals
new itr valve cover
jdm itr tranny(no grinds)
4000
stock ctr motor
no mods done to it all stock
motor tranny with everything still on it,dizzy, alt, header, ect...
3500
#47
Honda-Tech Member
iTrader: (2)
Re: (rhd94teg)
JDM Headlights w/ Skunk2 CF Eyelids
http://cgi.ebay.com/ebaymotors...80749
98' ITR USDM Recaro Front seats
$450
http://cgi.ebay.com/ebaymotors...80749
98' ITR USDM Recaro Front seats
$450
#50
Honda-Tech Member
Join Date: Aug 2002
Location: Pennsylvania, Usa
Posts: 472
Likes: 0
Received 0 Likes
on
0 Posts
Re: FS/WTB for August (Reid)
For Sale: 2001 Acura Integra Type R
SOLD
http://hondamarketplace.com/zerothread/2062941
Modified by TTZMatt at 11:50 PM 8/12/2007
SOLD
http://hondamarketplace.com/zerothread/2062941
Modified by TTZMatt at 11:50 PM 8/12/2007