The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time
#1
Honda-Tech Member
Thread Starter
The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time
I had the opportunity to run Texas Motorspeedway Roval this past August 9th. It is a once a year opportunity to do it, so I did. I had fun. Driving at night time is almost the same except you really have to use reference points on where to turn in. I think I did well. The suspension felt a tad soft.
Video: 314MB @ 10 minutes video length http://www.texas-racing.com/Jared/TDETMS8908.wmv - RIGHT CLICK SAVE AS
Highlights:
a) my lap times were 1:46s (for reference purposes), well modified C6 Z06 with hoosiers, 1:43s - considering there are ginormous straights and they do this track more often than I
b) mildly modified C6 Z06 and I were putting down similiar times
c) Hawk Blue's were really eating up my front rotors, got to see them glow!
d) fighting the G forces as you are going around the bank. You really have to put a death grip on the wheel, otherwise, you are going straight for an upper wall. (new found respect for NASCAR drivers although I still do not like it)
Downs:
a) broke the same axle as I did at Expo 8 - VIR - caused a huge vibration around T2 and T9, some of you may notice I was not driving as competitive in the last night session (not that it matters anyway since it was an HPDE)
b) did not have an instructor, although my lines were okay (I thought), maybe I could have more improved lines.
The Track
Pictures Courtesy of Alex:
<FONT SIZE="6">PS. I did not realize to double post from https://honda-tech.com/zerothread?id=2363262</FONT>
Modified by migs at 10:51 AM 8/11/2008
Video: 314MB @ 10 minutes video length http://www.texas-racing.com/Jared/TDETMS8908.wmv - RIGHT CLICK SAVE AS
Highlights:
a) my lap times were 1:46s (for reference purposes), well modified C6 Z06 with hoosiers, 1:43s - considering there are ginormous straights and they do this track more often than I
b) mildly modified C6 Z06 and I were putting down similiar times
c) Hawk Blue's were really eating up my front rotors, got to see them glow!
d) fighting the G forces as you are going around the bank. You really have to put a death grip on the wheel, otherwise, you are going straight for an upper wall. (new found respect for NASCAR drivers although I still do not like it)
Downs:
a) broke the same axle as I did at Expo 8 - VIR - caused a huge vibration around T2 and T9, some of you may notice I was not driving as competitive in the last night session (not that it matters anyway since it was an HPDE)
b) did not have an instructor, although my lines were okay (I thought), maybe I could have more improved lines.
The Track
Pictures Courtesy of Alex:
<FONT SIZE="6">PS. I did not realize to double post from https://honda-tech.com/zerothread?id=2363262</FONT>
Modified by migs at 10:51 AM 8/11/2008
#3
Honda-Tech Member
Join Date: Mar 2001
Location: WV, USA
Posts: 8,119
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (Jon D)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon D »</TD></TR><TR><TD CLASS="quote">Awesome post... thanks for sharing Mike </TD></TR></TABLE>
Very awesome! I've always wanted to try a roval at night.
Very awesome! I've always wanted to try a roval at night.
#4
Honda-Tech Member
Join Date: Jul 2005
Location: selling YOU a Honda or Acura
Posts: 12,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (migs)
That's so awesome, Mike. I'm so envious. You need to figure out this axle problem. It really has been putting a damper on your last couple events.
Glowing brake rotors and a chance to run on the same ground as the Big boy's FTW!!!
Glowing brake rotors and a chance to run on the same ground as the Big boy's FTW!!!
#6
Honda-Tech Member
Thread Starter
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (eflove)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by eflove »</TD></TR><TR><TD CLASS="quote">What size tires do you run? spring rates?</TD></TR></TABLE>
Tire/Wheel: 235-40-17 Shaved RA1's on SSR Comps 17x7.5 +42
Suspension: Tein RE 14/10 - I would like to upgrade to the PIC's 16/14 sometime
Tire/Wheel: 235-40-17 Shaved RA1's on SSR Comps 17x7.5 +42
Suspension: Tein RE 14/10 - I would like to upgrade to the PIC's 16/14 sometime
#7
Honda-Tech Member
Join Date: Mar 2007
Location: St. Louis, MO
Posts: 3,658
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (migs)
Nice, thanks for sharing.....I too will be hitting some banked turns in October at Gateway
Trending Topics
#9
Honda-Tech Member
Thread Starter
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (Jon D)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jon D »</TD></TR><TR><TD CLASS="quote">Mike... was there a white S2K running with no rollover protection? </TD></TR></TABLE>
Yes, Wendy from Austin. Car was 100% stock.
Yes, Wendy from Austin. Car was 100% stock.
#10
Honda-Tech Member
Join Date: Oct 2003
Location: Homie dont, play that, USA
Posts: 11,340
Likes: 0
Received 1 Like
on
1 Post
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (migs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by migs »</TD></TR><TR><TD CLASS="quote">
Yes, Wendy from Austin. Car was 100% stock.</TD></TR></TABLE>
Wow... ballzy at the speeds i anticipate you all were reaching. Downloading the vid to watch right now
Yes, Wendy from Austin. Car was 100% stock.</TD></TR></TABLE>
Wow... ballzy at the speeds i anticipate you all were reaching. Downloading the vid to watch right now
#15
Honda-Tech Member
Thread Starter
Re: (Wai)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Wai »</TD></TR><TR><TD CLASS="quote">Nice pics mike.
Are Z06's free in TX? Looks like everyone and their grandma has one. </TD></TR></TABLE>
LOL. Yeah, the event attracted alot of Z06, Porsche, Vipers, M3's, a new STI, a few mini's and other random import cars.
Are Z06's free in TX? Looks like everyone and their grandma has one. </TD></TR></TABLE>
LOL. Yeah, the event attracted alot of Z06, Porsche, Vipers, M3's, a new STI, a few mini's and other random import cars.
#16
Honda-Tech Member
Join Date: Jul 2005
Location: selling YOU a Honda or Acura
Posts: 12,299
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (Erik95LS)
It seems like the Z06 is the new entry level race car for many. I am seeing them all over the place where I am at too. There was 4 of them on track with me the other day out only 12 cars total.
#17
Honda-Tech Member
Join Date: Mar 2002
Location: 106 and Park
Posts: 6,295
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (get RIGHT)
Awesome thread migs. Your car makes all those other cars look like Civics.
#20
Honda-Tech Member
Join Date: Jul 2008
Location: Dallas, Tx, USA
Posts: 137
Likes: 0
Received 0 Likes
on
0 Posts
Re: (B18CXr)
Event was alot of fun.
I wish the infield portion was lighted...I would have loved to get some decent shots. The front straight is really the only place they will let you go to get pictures.
Corvettes are pretty much the perfect track car now. They are decently priced for a used C5 or even a new C6. Of course, there's always the RX7 with an LS swap There was one run group that was full of Corvettes, and only a few other makes.
Hopefully next year I'll be able to actually be on track instead of behind the pit wall.
I'm surprised they actually let the S2K run with no roll bar, especially at this track.
I wish the infield portion was lighted...I would have loved to get some decent shots. The front straight is really the only place they will let you go to get pictures.
Corvettes are pretty much the perfect track car now. They are decently priced for a used C5 or even a new C6. Of course, there's always the RX7 with an LS swap There was one run group that was full of Corvettes, and only a few other makes.
Hopefully next year I'll be able to actually be on track instead of behind the pit wall.
I'm surprised they actually let the S2K run with no roll bar, especially at this track.
#23
Honda-Tech Member
Join Date: Jun 2005
Location: Midwest
Posts: 430
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (migs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by migs »</TD></TR><TR><TD CLASS="quote">I had the opportunity to run Texas Motorspeedway Roval this past August 9th. It is a once a year opportunity to do it, so I did. I had fun. Driving at night time is almost the same except you really have to use reference points on where to turn in. I think I did well. The suspension felt a tad soft.
a) my lap times were 1:46s (for reference purposes), well modified C6 Z06 with hoosiers, 1:43s - considering there are ginormous straights and they do this track more often than I
b) mildly modified C6 Z06 and I were putting down similiar times
c) Hawk Blue's were really eating up my front rotors, got to see them glow!
d) fighting the G forces as you are going around the bank. You really have to put a death grip on the wheel, otherwise, you are going straight for an upper wall. (new found respect for NASCAR drivers although I still do not like it)
Downs:
a) broke the same axle as I did at Expo 8 - VIR - caused a huge vibration around T2 and T9, some of you may notice I was not driving as competitive in the last night session (not that it matters anyway since it was an HPDE)
b) did not have an instructor, although my lines were okay (I thought), maybe I could have more improved lines.
Modified by migs at 10:51 AM 8/11/2008</TD></TR></TABLE>
Looks like a great time. I thought i'd give a reference to what our Indycar drivers experience running the TMS oval.
A qualifying lap time (stickers and light downforce) they will average around 214.5mph which is around 24.4 second laps. They will be 100% throttle all the way around the oval and be experiencing between 3 and 5 lateral G's in the turns. Front straight max speeds are around 220mph and the minimum speed on track is 212mph. Also, their steering torque (steering effort) vairies between -7lb-tq and 30lb-tq.
a) my lap times were 1:46s (for reference purposes), well modified C6 Z06 with hoosiers, 1:43s - considering there are ginormous straights and they do this track more often than I
b) mildly modified C6 Z06 and I were putting down similiar times
c) Hawk Blue's were really eating up my front rotors, got to see them glow!
d) fighting the G forces as you are going around the bank. You really have to put a death grip on the wheel, otherwise, you are going straight for an upper wall. (new found respect for NASCAR drivers although I still do not like it)
Downs:
a) broke the same axle as I did at Expo 8 - VIR - caused a huge vibration around T2 and T9, some of you may notice I was not driving as competitive in the last night session (not that it matters anyway since it was an HPDE)
b) did not have an instructor, although my lines were okay (I thought), maybe I could have more improved lines.
Modified by migs at 10:51 AM 8/11/2008</TD></TR></TABLE>
Looks like a great time. I thought i'd give a reference to what our Indycar drivers experience running the TMS oval.
A qualifying lap time (stickers and light downforce) they will average around 214.5mph which is around 24.4 second laps. They will be 100% throttle all the way around the oval and be experiencing between 3 and 5 lateral G's in the turns. Front straight max speeds are around 220mph and the minimum speed on track is 212mph. Also, their steering torque (steering effort) vairies between -7lb-tq and 30lb-tq.
#24
Banned
Join Date: Jul 2006
Location: United States of Texas, USA
Posts: 2,996
Likes: 0
Received 0 Likes
on
0 Posts
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (migs)
Awesome, you gotta let me know when this goes down again, I'm in. IM'd my cell # and e-mail addy)
Sorry to hear you're still having axle problems.
WOW, black Viper with red trim is hotsexfire!
Modified by The Dude at 1:41 PM 8/13/2008
Sorry to hear you're still having axle problems.
WOW, black Viper with red trim is hotsexfire!
Modified by The Dude at 1:41 PM 8/13/2008
#25
Honda-Tech Member
iTrader: (2)
Re: The Drivers Edge - Texas Motorspeedway August 9th - Roval - night time (Swell_Ryder)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Swell_Ryder »</TD></TR><TR><TD CLASS="quote">
Looks like a great time. I thought i'd give a reference to what our Indycar drivers experience running the TMS oval.
A qualifying lap time (stickers and light downforce) they will average around 214.5mph which is around 24.4 second laps. They will be 100% throttle all the way around the oval and be experiencing between 3 and 5 lateral G's in the turns. Front straight max speeds are around 220mph and the minimum speed on track is 212mph. Also, their steering torque (steering effort) vairies between -7lb-tq and 30lb-tq. </TD></TR></TABLE>
Josh = Awesome
Looks like a great time. I thought i'd give a reference to what our Indycar drivers experience running the TMS oval.
A qualifying lap time (stickers and light downforce) they will average around 214.5mph which is around 24.4 second laps. They will be 100% throttle all the way around the oval and be experiencing between 3 and 5 lateral G's in the turns. Front straight max speeds are around 220mph and the minimum speed on track is 212mph. Also, their steering torque (steering effort) vairies between -7lb-tq and 30lb-tq. </TD></TR></TABLE>
Josh = Awesome