Vtec not engaging
#1
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ashtabula, OH, USA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Vtec not engaging
Okay I have done a few things ls/vtec. It is a gsr head. I have a p72 with hondata. I was playing with the chips in it because vtec was not working. All of a sudden my car would not rev over 3 grand. Checked the tps it is good and the map sensor is on their. I finally said forget it so I put back in my pr3 in it and now it revs just fine up to 6500.
My oil is new.
Coolant is good. Somthing is wrong with my system it will randomly spike and I will kill the car and start it up and it will be fine.
Stoninoid sceen is good.
I have the proper voltage.
I couldn't understand the resitance thing it was out of wack. Like I couldn't understand it.
My oil is new.
Coolant is good. Somthing is wrong with my system it will randomly spike and I will kill the car and start it up and it will be fine.
Stoninoid sceen is good.
I have the proper voltage.
I couldn't understand the resitance thing it was out of wack. Like I couldn't understand it.
#4
Honda-Tech Member
Thread Starter
Join Date: Nov 2007
Location: Ashtabula, OH, USA
Posts: 158
Likes: 0
Received 0 Likes
on
0 Posts
Re: Vtec not engaging (gshatch)
okay it goes into limp mode when the vtec stolinoid is conected??
i have a code for ingiton output signal, vtec stonlinoid, vtec malfunction, knock sensor,O2 sensor
my ouncle burned me a chip disableing everything he could vtec spool and knock sensor, o2 heater???
i have a code for ingiton output signal, vtec stonlinoid, vtec malfunction, knock sensor,O2 sensor
my ouncle burned me a chip disableing everything he could vtec spool and knock sensor, o2 heater???
Thread
Thread Starter
Forum
Replies
Last Post
vtec@4000rpm
Engine Management and Tuning
1
01-31-2009 02:17 PM
CustomizeHI808
Honda Civic / Del Sol (1992 - 2000)
3
11-27-2003 02:19 PM