Trouble Shooting... CEL codes...
#1
New User
Thread Starter
Join Date: Aug 2001
Location: Las Vegas
Posts: 44
Likes: 0
Received 0 Likes
on
0 Posts
Trouble Shooting... CEL codes...
3: Manifold Absolute Pressure (MAP) Circuit Low Input or High Input..... a friend said that this could be from the vibration of my cams (toda spec b's)... which is causing turbulence in the cat.
and
9: Cylinder Position sensor No signal or Cylinder Position sensor intermittent interruption.... I have no idea how to trouble shoot this one.
Also... if anyone has the patience and/or time to give me a little help on working with my VAFC I'd be entirely indebted to you. Just email me... tiny1219@hotmail.com
Thanks.
and
9: Cylinder Position sensor No signal or Cylinder Position sensor intermittent interruption.... I have no idea how to trouble shoot this one.
Also... if anyone has the patience and/or time to give me a little help on working with my VAFC I'd be entirely indebted to you. Just email me... tiny1219@hotmail.com
Thanks.
Thread
Thread Starter
Forum
Replies
Last Post
SIckH22Atch
Hybrid / Engine Swaps
3
08-08-2003 06:35 PM