Tacho Bouncing
Thread Starter
Joined: Dec 2001
Posts: 22
Likes: 0
From: sydney, nsw, australia
Tacho Bouncing
My Car is a '86 Integra SX16 (electronic Ign)
When at Normal Operating temp My tacho starts To bounce.
This occurs only under load when I push the Clutch it stops. Also the car Starts to Jerk and Can Hear My Zorst poping.
Checked Leads And Plugs They are ok all wiring Harness' are OK.
My Thoughts are the Ignition Module or Hall Sensor in the Dizzy. Dont think the Coil as if was coil would be Happining at Idle.
If u have any Idea Please help me.
[Modified by jpaudio, 9:13 AM 9/1/2002]
When at Normal Operating temp My tacho starts To bounce.
This occurs only under load when I push the Clutch it stops. Also the car Starts to Jerk and Can Hear My Zorst poping.
Checked Leads And Plugs They are ok all wiring Harness' are OK.
My Thoughts are the Ignition Module or Hall Sensor in the Dizzy. Dont think the Coil as if was coil would be Happining at Idle.
If u have any Idea Please help me.
[Modified by jpaudio, 9:13 AM 9/1/2002]
Thread
Thread Starter
Forum
Replies
Last Post
zenon8890
Honda CRX / EF Civic (1988 - 1991)
2
Jun 23, 2007 05:24 PM
darkstar1440
Honda Prelude
9
Aug 1, 2006 07:58 PM