Are Skunk2 manifolds
#3
Junior Member
Thread Starter
Join Date: Oct 2005
Location: Boston, Ma
Posts: 294
Likes: 0
Received 0 Likes
on
0 Posts
Re: Are Skunk2 manifolds (Del Sol on Steroids)
Good, Cause I've been hearing about AEBS and a full something brand. But I know AEBS are good for low end power
#5
Re: (undercoverdc2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by undercoverdc2 »</TD></TR><TR><TD CLASS="quote">Full-Race </TD></TR></TABLE>
x2....along with Edelbrock Victor X
x2....along with Edelbrock Victor X
Trending Topics
#8
Honda-Tech Member
Join Date: Sep 2004
Location: San Jose, CA, USA
Posts: 1,653
Likes: 0
Received 0 Likes
on
0 Posts
Re: (AF-P Dunc)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by AF-P Dunc »</TD></TR><TR><TD CLASS="quote">
x2....along with Edelbrock Victor X</TD></TR></TABLE>
x2....along with Edelbrock Victor X</TD></TR></TABLE>
#9
Re: Are Skunk2 manifolds (gotJDM-DAteg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by gotJDM-DAteg »</TD></TR><TR><TD CLASS="quote">mostly high, but the thing is if you put a higher flowing mani on a next to stock motor you can lose power. </TD></TR></TABLE>
i got [i/h/e/testpipe/ecu] on my 95 gsr. i purchased a skunk2 manifold, but still havent installed it. so if i put it on am i going to lose power for not having any cam upgrades,etc?
i got [i/h/e/testpipe/ecu] on my 95 gsr. i purchased a skunk2 manifold, but still havent installed it. so if i put it on am i going to lose power for not having any cam upgrades,etc?
#10
Re: Are Skunk2 manifolds (dc2rtek)
ive got an EF swapped b16a with AEM fuel rail and regulator, skunk2 valvetrain and supertec flat face valves, short ram intake, DC 4-2-1 header going to about 3 feet of straight pipe, along with other various boltons and an AEBS intake manifold. also port matching on intake and exhaust sides. i have other various boltons, a PR3 ecu and VAFC. it's also a fresh bottom end OEM build with less than 3,000 on it, but with just my slight modifications and stock timing, i can say my car pulls sufficiently above 6000 rpm's and i didnt have to sacrifice on the low end either. i would go with AEBS if you're looking for more help than hurt.
Thread
Thread Starter
Forum
Replies
Last Post