need some help
05-08-2008, 05:38 PM
#1
Thread Starter
Join Date: May 2008
Location: Zelienople, PA, United States
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
need some help
ok so i have a 99 integra and the wiring is messed up and when my lights are on the break light stays on and the cruise control won't work. When i press my breaks the running lights come on. Also it is missing on the first and second cylinder and says its running rich. i changed the plugs wires and distributor cap, and don't know what else to try. the second o2 sensor is not plugged in cause of the exhaust that is on, not sure if that has anything to do with it. Any info on what else try would be appreciated.
05-08-2008, 06:08 PM
#3
Thread Starter
Join Date: May 2008
Location: Zelienople, PA, United States
Posts: 5
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help (JEGD16Z6)
no about 8 months ago a shop put a new main wiring harness in and now these problems are randomly happening. I new at this so im not real sure where to start looking for the problem and no shops want to deal with it they just tell me to take it to a dealer.
05-08-2008, 06:11 PM
#4
Join Date: Mar 2008
Location: East Side, MD
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
Re: need some help (thaus)
wow the only thing i can tell you is get a wire diagram and dig in. try redoing the wiring job or take it back to the same people and have them pay Honda to do it.
Thread
Thread Starter
Forum
Replies
Last Post