while im doing my jdm front i would like to remove my a/c system from the bay. is there a diy for this or is it straight forward?

 

delete. i found a diy

 

Should be able to just pull it once the system has been evacuated.

 

Recovered.

 

i'm feeling a vent to atmosphere recovery in store

 

Lol

 

what ozone layer?

 

R134a, [94 up cars] will sell for up to $2.50 an oz up here, anybody out there that wants a recovery come to me, I will do it for free, inside Kelowna, I will come to you, [we have mobile service].

If it is R12, [93 and earlier], I will give you $2.50 an ounce, up here, to a guy with a classic car, I can sell R12 for pretty much anything I want.

There is no need to vent refrigerant, [nasty ****] into the atmosphere, I bet anybody a dollar that they have a shop in town that will recover refrigerant for free if you ask, uncontaminated refrigerant is 100% recyclable/reusable and money in the pocket.

jdmjackson, does the DIY you found show you how to change the evap. housing into a cabin filter, or just to replace with duct or plug it up? 94

 

i just ripped out all the lines, condensor, dryer, pump. havent done anything except the engine bay part. looks much cleaner and less to deal with. but no it didnt mention anything about a cabin filter. youre in kelowna bc? im in vernon

 

You will have to pop by one day, the the shop, Air Wolfe Auto Air Conditioning/Dave Ward Auto Electric is at 2070 Enterprise Way Kelowna B.C., right behind Budget rent a car off Hwy 97.

Your lucky, we have a few G2/3 at PicknPull, if you wanted to delete the evap housing also.
Everything above...
http://www.acuraautomotiveparts.org/...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal
And replace with heater duct, #7...
http://www.acuraautomotiveparts.org/...ystemcomp=List All&vinnoT=&trim=&trans=&view=normal $7.49 + 1/3 off untill Sun. 94