These are pics of what my friend said are custom Cunningham rods for an H22. They look like theyre stock rods. Can anyone confirm this??

 

well i can tell you they are not stock thats for shure, but i dont know what kind they are but they look nice

 

Thanks for the quick reply. Can anyone confirm that they are in fact Cunningham rods?? Ive heard lots of good things about Cunningham so I want to make sure that they are it before I buy them. TIA.

 

I know this is a late reply but yes they sure do look like Cunningham rods to me, take a look at this link and you can see that altough not the exact same look it is definately the same design.

http://m24x.zeroforum.com/zerothread?id=1362

I have just ordered a set of custom lenght Cunninhams myself, can't wait to get them delivered.

 

Whats up ozzyman, i see you finally got those pics my cousin sent you. Those are my friends rods. He owns MaxxAutoworks up here Seattle. Let me know if you still want them cause hes just waiting on you.

 

The Cunninghams look wider in the RM pix than the ones in the HT pix. What are the specs on the bolts in them?

 

I have used some Cunningham Ultra Lights and they looked just like your pics. What does the bolt read on the top?

 

ozzyman, rods are sold already. they went for $450 on ebay

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sixphak &raquo;</TD></TR><TR><TD CLASS="quote">ozzyman, rods are sold already. they went for $450 on ebay</TD></TR></TABLE>


He didn't ask if they were sold. You could have PMED him that!

He asked if they were cunninghams. Why not let him get an asnwer? He doesn't want to waste/lose his money. You as a seller should respect that.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by racinskittle &raquo;</TD></TR><TR><TD CLASS="quote">
He didn't ask if they were sold.</TD></TR></TABLE>

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ozzyman &raquo;</TD></TR><TR><TD CLASS="quote">before I buy them.</TD></TR></TABLE>

Considering he was asking because he wanted to buy them, I would think that the fact they are sold is rather pertinent information in this case.

 

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tegunderpressure &raquo;</TD></TR><TR><TD CLASS="quote">Considering he was asking because he wanted to buy them, I would think that the fact they are sold is rather pertinent information in this case. </TD></TR></TABLE>

You dont see my point

1st he could have PMed him that info!

2nd You have no clue why he posted that.....

He asked if he still wanted to buy the rods. 12 hours later he sold on ebay for $450?!



Think before you speak.

 

The fact that the ones in the RM thread is for a B-series and the ones pictured in this thread is for a H-series might have something to do with the different look

This is the spec on the rod bolts: rated at 296,000 PSI, made from AISI H11 tool steel