FullMetalJacket

Is a DOHC ZC IM better than the A6 IM..I have a Si now and if the a6 is better why not use it I guess. Do you i use my a6 dizzy? Also does the dohc zc put around 125-130hp at flywheel? Ive read they put from 115hp-135hp @ flywheel

crxgurlllll

u cant use the DOHC zc mani on an a6 they dont bolt up

ScottEK

I think you are talking about the SOHC because the lowest I've seen the ZC rated is 130.

SIRX

yeah black cover DOHC ZC is 130, brown is like 110

zCivic

You cann't use a ZC intake on a A6. The mounting points on the block are different, would have to rework it. Get a Z6 or Y8 manifold, bolts right up. Would say yes for the horsepower sounds about right in JDMland they measure H/P at the flywheel while in USA its at the wheels. About the Diz what are you asking, dont understand what you are saying/askin

ScottEK

A6 Dizz will not work on the DOHC, it doesnt mount up, supposedly you can cut off two of the legs and use it but its a major hack job. I think you have to flip the rotor too, its way more trouble than its worth, if you need and ZC distributor parts or the the sensor on the exhaust cam (Cylinder position sensor) just ask, I have a bunch of ZC stuff left over.

Hondasaurs

These are pics of the two intake maniflods, this is the DOHC ZC


This is the D16


Youcan see the difference in the bolt patterns right away. This should clear up any confusion you may have.

crx(gator)

you have your number mixed up

brown top ZC- 130-135 FLYWHEEL HP
Blacktop ZC- 130 FLYWHEEL HP

which is about 110-115 WHEEL HP aka WHP...

flywheel hp > than WHP...always...

pelotudo

What other fuel rails will bolt up to the ZC intake manifolds?

MrTodd

The '88-'89 Acura Integra LS (D16A1) fuel rail <U>MIGHT</U> fit the ZC manifold. I only say this because the A1 motor is the US's closest relative to the DOHC ZC.