removing oem finish on mugen mr5
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: yakima washington
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
removing oem finish on mugen mr5
hello im trying to polish my mugen mr5's and having a hard time removing the oem finish. paint stripper wont touch it and ive been sanding one wheel for several hours and still not to bare metal everywhere. anyone have an idea what would take this off?
thanks
thanks
#2
Re: removing oem finish on mugen mr5
try aircraft stripper/remover, it can take off valvecover wrinkle finish like its nothing, and i have yet to see a paint it cant get off. its this weird gel that will burn the crap out of your skin if you get it on you. you could always sandblast them also to get it to bare metal.
#3
Re: removing oem finish on mugen mr5
bulldog stripper thats in the can that foams is the key b/c it sticks to the wheel and then either a wire brush or 0000 steel wool. thats how i did my hx wheels
#4
Honda-Tech Member
Thread Starter
Join Date: Jun 2010
Location: yakima washington
Posts: 43
Likes: 0
Received 0 Likes
on
0 Posts
Re: removing oem finish on mugen mr5
i was talking about aircraft stripper. doesnt do anything to these wheels. its like a coating or something. not paint. ive used stripper on several wheels and valve covers. i just ended up sandblasting them and sanding them to get rid of the rough finish sand blasting left. thanks tho.
#5
Honda-Tech Member
Join Date: Sep 2010
Location: Pensacola, FL and every Court House in Louisiana
Posts: 3,114
Likes: 0
Received 2 Likes
on
2 Posts
Re: removing oem finish on mugen mr5
The spray can stripper is not as potent as the can you have to brush the stripper on. Your problem is the wheels are powdercoated. It can be done it just takes good thick coats left on longer than the recommended 15-25 minutes. When I stripped my wheels I left the stripper on over night and then brushed stripper on about 5-6 times.
Thread
Thread Starter
Forum
Replies
Last Post
dacrxguy
Wheel and Tire
2
09-29-2010 07:06 PM