BMaDOHC

whats up guys. I recently purchased a pair of slicks on 300zx wheels. I was wondering if they will fit my type r 5 lug suspension. thanks

RPRacing

you'll have better luck over in the ITR forums. but all you need to know is the offset and width of them rim. nothing else really matters. also, what size slicks are on there?

PHDZINE

Those factory 300ZX wheels are really heavy.

h22crxpwr

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by BMaDOHC &raquo;</TD></TR><TR><TD CLASS="quote">whats up guys. I recently purchased a pair of slicks on 300zx wheels. I was wondering if they will fit my type r 5 lug suspension. thanks</TD></TR></TABLE>

jack up your car and try them on....

BMaDOHC

I haven't got them yet and was trying to plan ahead for saturday(import wars at new england dragway) they're not stock wheels but it came off of a 300zx

h22 civic

im pretty sure they are the same bolot patern

Jared

you could have tried it in the time it took you to make this worthless post in the wrong forum

r.wright

iTrader: (58)

the bolt pattern will fit BUT remember, the wheels you have (not sure what year/size) will be at least 20mm offset less than your stock oem wheels. and at least 0.5 to 1.5 inches wider so you may need to roll your fenders if your car is low..

also, you need to use oem 12x1.5 lugs due to the z wheels being oem ball seat(12x1.25), of course

i93SE

from what i know Nissan hubs are bigger than Honda

wakedoe

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by i93SE &raquo;</TD></TR><TR><TD CLASS="quote">from what i know Nissan hubs are bigger than Honda</TD></TR></TABLE>

I know for sure that the 4x114 and 4x100 Nissan hubs are bigger than Honda's, but dk about about the 5x114s.

nsxtasy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RPRacing &raquo;</TD></TR><TR><TD CLASS="quote">all you need to know is the offset and width of them rim. nothing else really matters.</TD></TR></TABLE>

Other things DO matter. Like the wheel diameter, the bolt pattern, and the center bore. The spoke design may affect clearance also.

RPRacing

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by nsxtasy &raquo;</TD></TR><TR><TD CLASS="quote">

Other things DO matter. Like the wheel diameter, the bolt pattern, and the center bore. The spoke design may affect clearance also.
</TD></TR></TABLE>
they are a 5x114.3 rim like all the 300s. nissan center bore is bigger than a honda, and i'm pretty sure the spoke design on the 300s are going to be similar to our cars. also, wheel diameter i would hope he would have used his best judgement not to get 18+s

nsxtasy

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RPRacing &raquo;</TD></TR><TR><TD CLASS="quote">nissan center bore is bigger than a honda</TD></TR></TABLE>

Then you'll want to get a set of hubcentric rings to avoid the possibility of vibration problems, which are common when using rims with a bigger center bore than the hub of the car they're going on.