Mitre into an elbow (exhaust)
#1
Honda-Tech Member
Thread Starter
Mitre into an elbow (exhaust)
Im thinking this one through and I want to find an easier way than playing around with a grinder wheel to fit this up.
I have been requested to make a 90 degree mitred into a straight pipe to come off the pipe perpendicular to the pipe thats there now.
Any ideas how to mitre into an elbow straight down from one of the machined faces besides hogging it out with a grinder (or mounting it in a mill)?
M
I have been requested to make a 90 degree mitred into a straight pipe to come off the pipe perpendicular to the pipe thats there now.
Any ideas how to mitre into an elbow straight down from one of the machined faces besides hogging it out with a grinder (or mounting it in a mill)?
M
#3
Re: Mitre into an elbow (exhaust)
Tube notcher, or grind it out. Do you have a pipe fitters blue book? You can mark it out like a branched saddle with 8 quadrant lines and cut it pretty close pretty quick.
Thread
Thread Starter
Forum
Replies
Last Post