2.5" collector mod? What flanges to use?
10-26-2008, 09:55 PM
#1
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Earth
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
2.5" collector mod? What flanges to use?
I'm gonna do the 2.5" collector mod to my edelbrock header. I wanna know if it is better to use 2 bolt flanges like these to connect the header to the cat
http://cgi.ebay.com/ebaymotors...A1318
Or to use a flange with a thick donut like this
http://cgi.ebay.com/ebaymotors...l1116
http://cgi.ebay.com/ebaymotors...A1318
Or to use a flange with a thick donut like this
http://cgi.ebay.com/ebaymotors...l1116
10-27-2008, 05:03 PM
#3
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Earth
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
Re: 2.5" collector mod? What flanges to use? (-RedneckDave-)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by -RedneckDave- »</TD></TR><TR><TD CLASS="quote">Why not go with a v-band clamp? It would be a better seal.</TD></TR></TABLE>
That's a good idea
any idea where I can get the clamp and flanges for less than $80 like most sites I've seen?
That's a good idea
any idea where I can get the clamp and flanges for less than $80 like most sites I've seen?
10-27-2008, 05:13 PM
#4
Honda-Tech Member
10-27-2008, 05:58 PM
#5
Honda-Tech Member
Thread Starter
iTrader: (1)
Join Date: Jun 2008
Location: Earth
Posts: 1,537
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Turbogixxer)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Turbogixxer »</TD></TR><TR><TD CLASS="quote">http://www.racepartsolutions.c...t=106
$47 for 2.5</TD></TR></TABLE>
Thank you kindly
$47 for 2.5</TD></TR></TABLE>
Thank you kindly
Thread
Thread Starter
Forum
Replies
Last Post
JsNA99si
All Motor / Naturally Aspirated
3
05-27-2004 08:46 PM
