NC K20a EG6 for sale
#1
Junior Member
Thread Starter
K20a EG6 for sale
I am selling my K20a swapped 93 eg hatch. I bought the car in 2005 and it was bone stock. The motor was purchased through H-motors online and was swapped and tuned by Chad Slagg. After about 4,000 or 5,000 miles I installed the Exedy Clutch and Flywheel. I installed the rest of the parts on the car prior to the motor swap so they all probably have around 5,000 additional miles on them. I have most of the interior for the car which I plan on selling separately, but if you would like any of it with the vehicle then we may be able to work something out. The passenger side door does have a decent dent in it from years ago when a lady backed into the car with her tow hitch; I decided to put the money into parts instead of fixing the dent. This car has always been garage kept and maintained meticulously. I have roughly $25,000 invested. I am asking $9,000.00 or best offer. Serious inquiries only. I will not acknowledge low ball offers; I understand you are trying to negotiate but don’t insult. If you would like any additional pictures, I will be more than happy to send them your way.
There is a chance I have missed some parts, I’ll update as they come to me.
Motor/Tranny
K20a with JDM Tranny – bought in 2006 from H-motors online
Hondata Kpro
CAI
Rcrew Race Header
Buddy Club Spec 2 exhaust
AEM fuel rail
AEM fuel pressure regulator
SS braided fuel lines
Hasport mounts
Hasport harness
Hasport 400hp axles
Exedy Stage 2 clutch (5,000 miles)
Exedy Race Flywheel (5,000 miles)
Koyo half size dual core race radiator
Walbro 255 fuel pump
• At the time, H-motors was listing their K motors with around 30,000 miles and I have put around 10,000 miles on the motor since it was swapped in 2006.
• Motor swapped and tuned by Chad Slagg
• Last time it was on the dyno it put down 224hp and 178 ft/lb tq
Chassis
Buddy Club racing spec dampers
ITR 22mm rear sway bar
A-Spec Racing rear sub frame brace
GSR rear lower control arms
GSR rear brakes and trailing arms
GSR front spindles
Acura Legend front calipers
ITR front rotors drilled to 4x100
Porterfield R4 front pads
Goodridge SS brake lines
ITR brake master cylinder
ITR brake booster
SpeedMaster 15inch SM046 (Flat Black) wrapped in Hankook RS2 (around 70% tread)
SpeedMaster 15inch SM046 (Bronze) wrapped in Kumho Ecsta Supra (around 30% tread)
Auto Power roll cage
Miscellaneous Parts
Buddy Club race seat (driver side)
Mugen Seat Rails
DelSol passenger seat
Sparco Steering Wheel with quick disconnect
MOMO hub adapter
Spoon Replica duck bill wing
Spoon Replica side mirrors
Mugen Replica front lip
Sparco Race Pedals
JDM DC5 Shift ****
Spoon radiator cap
JDM amber corner lenses
Front and Rear tow hooks
There is a chance I have missed some parts, I’ll update as they come to me.
Motor/Tranny
K20a with JDM Tranny – bought in 2006 from H-motors online
Hondata Kpro
CAI
Rcrew Race Header
Buddy Club Spec 2 exhaust
AEM fuel rail
AEM fuel pressure regulator
SS braided fuel lines
Hasport mounts
Hasport harness
Hasport 400hp axles
Exedy Stage 2 clutch (5,000 miles)
Exedy Race Flywheel (5,000 miles)
Koyo half size dual core race radiator
Walbro 255 fuel pump
• At the time, H-motors was listing their K motors with around 30,000 miles and I have put around 10,000 miles on the motor since it was swapped in 2006.
• Motor swapped and tuned by Chad Slagg
• Last time it was on the dyno it put down 224hp and 178 ft/lb tq
Chassis
Buddy Club racing spec dampers
ITR 22mm rear sway bar
A-Spec Racing rear sub frame brace
GSR rear lower control arms
GSR rear brakes and trailing arms
GSR front spindles
Acura Legend front calipers
ITR front rotors drilled to 4x100
Porterfield R4 front pads
Goodridge SS brake lines
ITR brake master cylinder
ITR brake booster
SpeedMaster 15inch SM046 (Flat Black) wrapped in Hankook RS2 (around 70% tread)
SpeedMaster 15inch SM046 (Bronze) wrapped in Kumho Ecsta Supra (around 30% tread)
Auto Power roll cage
Miscellaneous Parts
Buddy Club race seat (driver side)
Mugen Seat Rails
DelSol passenger seat
Sparco Steering Wheel with quick disconnect
MOMO hub adapter
Spoon Replica duck bill wing
Spoon Replica side mirrors
Mugen Replica front lip
Sparco Race Pedals
JDM DC5 Shift ****
Spoon radiator cap
JDM amber corner lenses
Front and Rear tow hooks
Last edited by EriK20; 04-06-2016 at 05:51 PM. Reason: Price change
#3
Junior Member
Thread Starter
Re: K20a EG6 for sale
Thanks bro, I appreciate the heads up. I can't figure out why the pics wont import properly or how to rotate them.
Last edited by EriK20; 04-06-2016 at 05:53 PM.
Trending Topics
Thread
Thread Starter
Forum
Replies
Last Post