ordering clutch and flywheel for crx need help
#1
ordering clutch and flywheel for crx need help
im have ordering one of the ebay gripforce. http://cgi.ebay.com/ebaymotors/F1-RA...Q5fAccessories
My question is my crx is an 89 with z6 swap with 89 si tranny which clutch i've read is 200mm, the sight says the clucth is 212mm will this matter or does it just have to be 20 spline count. Also i just wanted to make sure the flywheel for the crx will fit the z6.
My question is my crx is an 89 with z6 swap with 89 si tranny which clutch i've read is 200mm, the sight says the clucth is 212mm will this matter or does it just have to be 20 spline count. Also i just wanted to make sure the flywheel for the crx will fit the z6.
#2
Honda-Tech Member
Re: ordering clutch and flywheel for crx need help
it should be fine as long as your clutch and pressure plate match your flywheel. I had a 90-91 d series flywheel and a 88 si tranny so I ordered the 88si clutch to go with my tranny and found that the pressure plate was too small to bolt onto the 8lb flywheel I had so I just ordered a new pp and used the 88 clutch disk.
Thread
Thread Starter
Forum
Replies
Last Post
SPOON_BeIgHtEeNsEe
Honda Civic / Del Sol (1992 - 2000)
11
04-09-2004 07:10 PM
PaImportTuner
Honda CRX / EF Civic (1988 - 1991)
11
01-16-2004 09:49 AM
DsMWookie
Honda CRX / EF Civic (1988 - 1991)
4
09-18-2002 09:49 PM