vedocustoms128

iTrader: (1)

Dose any one have a good diagram for coolant by pass for throttle. I have 00 b16a2 n type r intake manifold. N its just track car so i understand about winter problems but i dont drive it then. The car is turboed n e85 so i heard this might help cool down intake a lil so i would like to try. Thanks guys

Gunmetal_B20_Hatch

iTrader: (9)

So... You managed to turbo your car but cant figure out how to do a simple coolant bypass??? WTH

vedocustoms128

iTrader: (1)

Yea i mean somethings i like to check. If u know why dont u tell me lol

MonkeyMagic

may help to stabilize intake temps on a na car trying to more-precisely pass emissions, or to prevent throttle icing. but it surely isn't going to cool anything in the manner which you desire.

this. was what i wondered.

if you really can't figure it out, get on hondaautomotiveparts.com and find the right diagram for the motor you have.

doood

iTrader: (1)

find every coolant hose running to your tb and disconnect and loop it. have you even taken a look at it?

uberEFtuner

I installed an phenolic intake manifold gasket like hondata. And I bypassed my coolant to the throttle body. Just by touch I could feel a huge difference. The intake was very hot before, and after you could hold your hand on it.

I don't know if a turbo setup would benefit.