Dose any one have a good diagram for coolant by pass for throttle. I have 00 b16a2 n type r intake manifold. N its just track car so i understand about winter problems but i dont drive it then. The car is turboed n e85 so i heard this might help cool down intake a lil so i would like to try. Thanks guys

 

So... You managed to turbo your car but cant figure out how to do a simple coolant bypass??? WTH

 

Yea i mean somethings i like to check. If u know why dont u tell me lol

 

may help to stabilize intake temps on a na car trying to more-precisely pass emissions, or to prevent throttle icing. but it surely isn't going to cool anything in the manner which you desire.

this. was what i wondered.

if you really can't figure it out, get on hondaautomotiveparts.com and find the right diagram for the motor you have.

 

find every coolant hose running to your tb and disconnect and loop it. have you even taken a look at it?

 

I installed an phenolic intake manifold gasket like hondata. And I bypassed my coolant to the throttle body. Just by touch I could feel a huge difference. The intake was very hot before, and after you could hold your hand on it.

I don't know if a turbo setup would benefit.