M10x1.25x130 bolts- Where can I get grade 8 or better?
#1
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
M10x1.25x130 bolts- Where can I get grade 8 or better?
McMaster-Carr only has this in a 120mm length. Will I have to get these made? They're for the inner LCAs.
#2
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
Found a socket head.
http://www.ballerbolts.com/titanium-...-25x130mm.html
They have them here as well. Couple dollars cheaper in titanium.
http://www.ballerbolts.com/titanium-...-25x130mm.html
They have them here as well. Couple dollars cheaper in titanium.
Last edited by grumblemarc; 01-20-2012 at 04:54 AM.
#4
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
So I've learned that unless you can make these or get someone to make these you cannot get this size in stainless steel longer than 120mm. You can only get them in titanium and they are SPENDY. Average cost is $30 for ONE!
#6
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
Yup! I have a little minor subframe damage on the right side from the previous owner (that I didn't know about when I bought the car) and am also running an ASR brace (to support the damage). When I took it off to install new LCAs I realized that there never really were enough threads actually securing that whole assembly in the first place. I think it took me less than 3 turns of a ratchet and it loosened right up. Scared the crap outta me so I went off in search of longer ones. The ASR uses 120mm bolts and no one makes longer ones (off the shelf) in steel so I have to go this route for piece of mind
#7
B*a*n*n*e*d
iTrader: (15)
Join Date: Jul 2008
Location: montebello, ca, us
Posts: 6,632
Likes: 0
Received 15 Likes
on
10 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
I know of a bolt manufacture that I had to get bolts from a couple weeks ago for my engine stand ill see if they have that siize or I can get u the number
Trending Topics
#10
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
Ordered a pair of M10x1.25.135mm in titanium from Ballerbolts. Damn it was pricey. I'll post back when they get here and see how fast they ship. They also have some bolt kits for Hondas in all titanium. Truly baller stuff.
Last edited by grumblemarc; 01-23-2012 at 08:10 AM.
#12
The Grumpiest
Thread Starter
iTrader: (4)
Join Date: May 2008
Location: Oak Ridge, TN, USA
Posts: 28,333
Likes: 0
Received 16 Likes
on
15 Posts
Re: M10x1.25x130 bolts- Where can I get grade 8 or better?
Of course. Because I'm stupid and only remembered to do it AFTER I placed that order!
Smith Fasteners
M10 1.25 x 130 8.8 hex bolt is $4.15 each
Smith Fasteners
M10 1.25 x 130 8.8 hex bolt is $4.15 each
Thread
Thread Starter
Forum
Replies
Last Post