how much to bore block?
#1
Honda-Tech Member
Thread Starter
Join Date: Sep 2000
Location: ma, USA
Posts: 671
Likes: 0
Received 0 Likes
on
0 Posts
how much to bore block?
how much will it cost me to bore my gsr block .25 mm for ctr pistons? or should i just bore it to 82mm and get differant pistons?
thanks Luis and will it cost more money depending on the size of the bore?
thanks Luis
thanks Luis and will it cost more money depending on the size of the bore?
thanks Luis
#3
Honda-Tech Member
Join Date: Oct 2002
Location: Nathalie, VA
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much to bore block? (95gsr)
Bore as little as possible. The less you bore the more and more times you can reuse your block, unless you crack it. Not to jinx you or anything
#7
Honda-Tech Member
Join Date: Oct 2002
Location: Nathalie, VA
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much to bore block? (dc2dragster)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by dc2dragster »</TD></TR><TR><TD CLASS="quote">take it to a machine shop itll probably be $10-20 a hole </TD></TR></TABLE>
Thats about right....Mine were $20 each
Thats about right....Mine were $20 each
Trending Topics
#9
Honda-Tech Member
Join Date: Oct 2002
Location: Nathalie, VA
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much to bore block? (Powered By D15)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Powered By D15 »</TD></TR><TR><TD CLASS="quote">get the type r .25 os </TD></TR></TABLE>
Thats only .010" over...standard overbore is usually .020" isnt it.....
Thats only .010" over...standard overbore is usually .020" isnt it.....
#10
Honda-Tech Member
Join Date: Oct 2002
Location: Northern California
Posts: 3,789
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much to bore block? (TurboB16aEG)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by TurboB16aEG »</TD></TR><TR><TD CLASS="quote">
Thats only .010" over...standard overbore is usually .020" isnt it.....</TD></TR></TABLE>
standard bore is when you get pistons that drop right in..so you dont bore at all...right?
Thats only .010" over...standard overbore is usually .020" isnt it.....</TD></TR></TABLE>
standard bore is when you get pistons that drop right in..so you dont bore at all...right?
#11
Honda-Tech Member
Join Date: Oct 2002
Location: Nathalie, VA
Posts: 747
Likes: 0
Received 0 Likes
on
0 Posts
Re: how much to bore block? (Powered By D15)
Not standard bore...standard overbore....well there isnt really a standard overbore...i just ment that its the size most people go with when boring out the cylinders....
Thread
Thread Starter
Forum
Replies
Last Post
brokeHonda
All Motor / Naturally Aspirated
10
10-19-2005 04:22 PM
roydogg
Forced Induction
9
08-06-2003 06:49 AM