Hondata Help!!! B20vtec
#1
Hondata Help!!! B20vtec
Ok, I bought a Hondata S200 last week. I just recieved my P28 from Hondata. But Im still waiting for my S200 from wired Speed lab. Now I just put the motor together today. And Ive ran into a problem. I test drove the car after the build and noticed that I have NO power and it is back firing when you step on the gas. Is this because I have only the Socketted P28 and no tunning device? Im really stumped and need a little advice. Here are my mods. I ran the same motor a month ago with NO problems. At that time it had CTR cams and a Chipped P29 by Erick's racing.
2000 B16a2 head-stock
2000 b20z2 block-stock
Skunk2 Stage 1 cams
Hondata S200 (all motor) with P28
walbro 255
Rc 310cc injectors
AEM- Fuel Rail, Fuel Preeure Regulator, Cam Gears
ACT- 8lb Flywheel, Xt PP, SS disc
Dc Sports 4-1
J's Racing intake
2000 B16a2 head-stock
2000 b20z2 block-stock
Skunk2 Stage 1 cams
Hondata S200 (all motor) with P28
walbro 255
Rc 310cc injectors
AEM- Fuel Rail, Fuel Preeure Regulator, Cam Gears
ACT- 8lb Flywheel, Xt PP, SS disc
Dc Sports 4-1
J's Racing intake
#4
Honda-Tech Member
Re: (Plugs)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Plugs »</TD></TR><TR><TD CLASS="quote">Ok what you said sound right. But wouldnt I have some kind of power with a Socketted P28 at least?</TD></TR></TABLE>
Not without the Hondata box. They probably made a Hondata base map for you and either the chip is not in there, or you are trying to run w/o the hondata box.
Not without the Hondata box. They probably made a Hondata base map for you and either the chip is not in there, or you are trying to run w/o the hondata box.
#5
Re: (Blown90hatcH)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Blown90hatcH »</TD></TR><TR><TD CLASS="quote">
Not without the Hondata box. They probably made a Hondata base map for you and either the chip is not in there, or you are trying to run w/o the hondata box.</TD></TR></TABLE>
Ok I dont have the Hondata box yet. It will be here this week. The car runs and drives right now. But Like I said. I only have a socketted P28 running the motor.
Not without the Hondata box. They probably made a Hondata base map for you and either the chip is not in there, or you are trying to run w/o the hondata box.</TD></TR></TABLE>
Ok I dont have the Hondata box yet. It will be here this week. The car runs and drives right now. But Like I said. I only have a socketted P28 running the motor.
#7
The CEL light is on. And i tried to jump it so I could see what code was flashing. But for some reason now that I have this P28 that is Socketted I cant jump the codes to see which code it is.
Trending Topics
#8
Honda-Tech Member
Re: (Plugs)
It is because it is running in limp mode stunna. Solid CEL even after you jump it. Wait for the S200 and then install the base map and try it again.
#9
ok I didnt know that it was in Limp mode. Thank you for your help. I was on Hondata.com in there forum's tring to get these same questions asked but never got a reply. Ill keep you up dated in a day or so after I get my box.
Thread
Thread Starter
Forum
Replies
Last Post
thirsk66
Honda Prelude
7
02-02-2015 10:41 AM
gunslinger
Texas -OK -LA (Sales)
3
10-05-2005 05:57 AM