Camhaas

Okay guys I've tried searching and searching but still nothing. I need my rpms to work (wire up) I have an h22a4 block with out a cps and a h22a head with JDM dizzy. And a p28 ecu. My problem is that I have a aftermarket tech and a stock 97 civic DX tach but both of them are not working and I've tried taping the wire harness before the ecu and the blue wire off the dizzy and still nothing. My tune is coming up in 11 days and need to get this figured out ASAP
Any help would be greatly appreciated. Thanks

Camhaas

Bump

Camhaas

9 days till tune bump

Camhaas

7 days till tune please help

holmesnmanny

Call rywire and ask them for a distributor conversion adapter kit. They will either have one or make one.

Muckman

iTrader: (2)

The blue wire off the dist doest work? It should. make sure its the correct blue wire. Read the documentation for the aftermarket tach, it should give you some clues.

Camhaas

Just put in the cps and nothing. I'm tune is in 6 days and I have to figure this out

Camhaas

Its the TD60 dizzy if that helps

n/a2boost

The tach wire is the blue wire in the two wire plug of the distributor.

HondaPartsHero

Worst case there should be a two wire connector on the drivers side with a blue wire for tach signal.