Question for the Steering Rack Rebuilding DIY'ers
05-01-2011, 10:54 AM
#1
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: Los Angeles
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Question for the Steering Rack Rebuilding DIY'ers
My rack was leaking PS fluid so I decided to rebuild it myself. Upon cleaning the rack, I noticed some wear that you can feel. I should replace this huh 
05-01-2011, 11:18 AM
#3
Honda-Tech Member
Thread Starter
Join Date: Apr 2005
Location: Los Angeles
Posts: 190
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question for the Steering Rack Rebuilding DIY'ers
Figures, thanks...
Next question: The Helm Manual recommends using a piston ring sizing tool for the sleeve on the pinion shaft and other parts. Can this be improvised?
Next question: The Helm Manual recommends using a piston ring sizing tool for the sleeve on the pinion shaft and other parts. Can this be improvised?
05-07-2011, 10:37 AM
#6
Honda-Tech Member
Join Date: Jun 2008
Location: Bailey, CO, USA
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: Question for the Steering Rack Rebuilding DIY'ers
If you're referring to the 0"-4 1/2" bearing separator, that's a generic tool and can be had for $25 at Harbor Freight.
Thread
Thread Starter
Forum
Replies
Last Post
