Integra 4x114 rear bearing
#1
I drive a G35, it's silver, surprised?
Thread Starter
iTrader: (1)
Join Date: Apr 2005
Location: Los Angeles.
Posts: 5,343
Likes: 0
Received 0 Likes
on
0 Posts
Integra 4x114 rear bearing
This is a long shot, but I'll ask anyways.
I installed a 4x114 hub conversion on my 94' Integra LS. In a nutshell, I installed 97 ITR rear hubs onto the stock USDM rear trailing arms.
I thought it would be straight foward but what I found out is that the bearings are thicker than the USDM bearings. So now, I cannot install the thick metal washer along with the axle nut. It's like the spindle is too short.
So, my question is does anyone know what bearing I should use? It has to have the center bore of the ITR but mount onto a regular 32mm spindle AND be thin like the USDM bearing. I'm thinking Accord...but maybe someone knows for certain?
I installed a 4x114 hub conversion on my 94' Integra LS. In a nutshell, I installed 97 ITR rear hubs onto the stock USDM rear trailing arms.
I thought it would be straight foward but what I found out is that the bearings are thicker than the USDM bearings. So now, I cannot install the thick metal washer along with the axle nut. It's like the spindle is too short.
So, my question is does anyone know what bearing I should use? It has to have the center bore of the ITR but mount onto a regular 32mm spindle AND be thin like the USDM bearing. I'm thinking Accord...but maybe someone knows for certain?
Thread
Thread Starter
Forum
Replies
Last Post