Frog

I'm looking at getting a five lug conversion, and the only one available is an EK9 CTR conversion.

I'm using 96 spec DC2 type R axles, so that won't be a problem.

I know the discs and calipers are identical, I'm wondering about front knuckle assembly and rear brake lines.

If anyone has done this swap, let me know what issues, if any, you've run into.

slofu

EK front knuckles will NOT fit a DC. For a 5 lug conversion, don't you just need the spindles (and new wheel bearings)?

Frog

You need the whole knuckle to position the caliper properly.

Dogginator

ITR knuckle=non-ITR knuckle for a DC2/4 Integra.