Arp Headstuds
#1
Honda-Tech Member
Thread Starter
Join Date: Jun 2002
Location: Florida, us
Posts: 2,105
Likes: 0
Received 0 Likes
on
0 Posts
Arp Headstuds
Would you guys recommed me putting these in for a stock bottom end turbo b16? The head has never been pulled before. Im not sure if I should by them or not. Setup inline pro mani sc61 10psi. Thanks
#2
Honda-Tech Member
Re: Arp Headstuds (drvfast)
If you are already pulling the head it wont hurt to put them in . if that is the only reason to pull the head i wouldnt waste the time.
#5
Re: Arp Headstuds (drvfast)
i used to boost 12psi on a stock bottom end and stock head with the stock head bolts. just make shure you have it tuned with good fuel management. if you where going to remove the head for other resons i would put them in but if thats the only reason i wouldnt waste the time or $$.
Thread
Thread Starter
Forum
Replies
Last Post