skunk2 pro series throttle body
02-20-2013, 08:40 PM
#1
skunk2 pro series throttle body
need help..
anybody using this type of throttle body??
need to know where to put the hose but it doesn't have the tube where i connect it like the oem throttle body..
it doesn't have the tube where i connect the hoses like the oem throttle body.. can i direct those three hoses??
i did some research but i cant seem to find the right one.
please help!!
anybody using this type of throttle body??
need to know where to put the hose but it doesn't have the tube where i connect it like the oem throttle body..
it doesn't have the tube where i connect the hoses like the oem throttle body.. can i direct those three hoses??
i did some research but i cant seem to find the right one.
please help!!
Last edited by jdmkid808; 02-21-2013 at 06:46 AM. Reason: ---
02-21-2013, 09:29 AM
#2
Honda-Tech Member
iTrader: (1)
Join Date: Sep 2008
Location: wilmington, ca, usa
Posts: 1,216
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro series throttle body
Lol. Dam..!!!
First of all. Yes you did get the wrong one..
Jk.
Just find where the coolent lines go. Then just re route them directly back into the motor. Skip the throttle body.
If u wanted to connect everything like stock. Then u can get a TB like this.
Good luck.
First of all. Yes you did get the wrong one..
Jk.
Just find where the coolent lines go. Then just re route them directly back into the motor. Skip the throttle body.
If u wanted to connect everything like stock. Then u can get a TB like this.
Good luck.
02-21-2013, 09:38 AM
#3
Honda-Tech Member
Join Date: Jul 2007
Location: kuv hlub koj Oak Ridge, Tn, usa
Posts: 778
Likes: 0
Received 0 Likes
on
0 Posts
Re: skunk2 pro series throttle body
Lol. Dam..!!!
First of all. Yes you did get the wrong one..
Jk.
Just find where the coolent lines go. Then just re route them directly back into the motor. Skip the throttle body.
If u wanted to connect everything like stock. Then u can get a TB like this.
Good luck.
First of all. Yes you did get the wrong one..
Jk.
Just find where the coolent lines go. Then just re route them directly back into the motor. Skip the throttle body.
If u wanted to connect everything like stock. Then u can get a TB like this.
Good luck.
Thread
Thread Starter
Forum
Replies
Last Post
B18cHatch06
All Motor / Naturally Aspirated
3
03-29-2006 02:53 PM