OBD1 TO OBD2 H22 IN A EK
#1
OBD1 TO OBD2 H22 IN A EK
A little backround live in Maryland, I have a Honda Civic 98 Hatchback with a H22 swap. I currently have a obd1 to obd2 jumper and I since I have that setup the obd2 plug in does not except readings. The question I am trying to ask is what is needed to pass emissions do I need to get a obd2 ecu, will that work? Thanks for any help or advice you guys can give me in this matter.
#2
Honda-Tech Member
Join Date: Oct 2006
Location: Hedgesville, wv, us
Posts: 17
Likes: 0
Received 0 Likes
on
0 Posts
Re: OBD1 TO OBD2 H22 IN A EK
With Maryland. If your car comes factory OBD2 u wont get the sniffer test. THey will hook it up to diagnostics and scan it. If u have it OBD1 on a OBD2 car they will say u altered emissions and will probably fail you.
#3
Re: OBD1 TO OBD2 H22 IN A EK
I already understand this ... I am looking for a solution to this
#4
Seagull Management
Join Date: Jun 2008
Location: Miramichi, NB, Canada
Posts: 15,150
Likes: 0
Received 24 Likes
on
22 Posts
Re: OBD1 TO OBD2 H22 IN A EK
You'll need a USDM '96 (all other years have an immobilizer) OBD2 ECU, and you'll need to add a secondary O2 sensor, perform the CKF trick, and IIRC as far as H-series engines go distributors are completely different between OBD1 and OBD2 (you might want to look into that one a little closer though, I almost never deal with H/F-series.
Thread
Thread Starter
Forum
Replies
Last Post
JBirch_97Prelude
Honda Prelude
6
09-26-2007 01:43 PM