Notices

what have you guys done to adapt the FITV on to an aftermarket intake mani?

Thread Tools
 
Search this Thread
 
Old 08-11-2009, 11:15 AM
  #1  
949
Honda-Tech Member
Thread Starter
 
949's Avatar
 
Join Date: Aug 2004
Location: Orange County
Posts: 1,623
Likes: 0
Received 2 Likes on 2 Posts
Default what have you guys done to adapt the FITV on to an aftermarket intake mani?

i got the skunk2 intake manifold. i wanted to still use the FITV for the normal warm up in the morning.

what have you guys done to get the fitv to still work?
Old 08-11-2009, 11:46 AM
  #2  
Honda-Tech Member
 
gringo7718's Avatar
 
Join Date: Feb 2002
Location: MIAMI
Posts: 1,210
Likes: 0
Received 2 Likes on 2 Posts
Default Re: what have you guys done to adapt the FITV on to an aftermarket intake mani?

Get a throttle body from an OBD1 B-series (LS or GSR - both 60mm). These have the FITV that bolts under the throttle body.


Last edited by gringo7718; 08-11-2009 at 05:42 PM.
Old 08-11-2009, 05:24 PM
  #3  
949
Honda-Tech Member
Thread Starter
 
949's Avatar
 
Join Date: Aug 2004
Location: Orange County
Posts: 1,623
Likes: 0
Received 2 Likes on 2 Posts
Default Re: what have you guys done to adapt the FITV on to an aftermarket intake mani?

thanks i didnt know that.

i have the blox throttle body now.
i dont think it has that on the bottom.

does skunk2 have that?
Old 08-12-2009, 07:36 AM
  #4  
949
Honda-Tech Member
Thread Starter
 
949's Avatar
 
Join Date: Aug 2004
Location: Orange County
Posts: 1,623
Likes: 0
Received 2 Likes on 2 Posts
Default Re: what have you guys done to adapt the FITV on to an aftermarket intake mani?

will the fitv from that work with my obd0 plug? or do i need to rewire it?
Old 08-12-2009, 08:14 AM
  #5  
Honda-Tech Member
 
gringo7718's Avatar
 
Join Date: Feb 2002
Location: MIAMI
Posts: 1,210
Likes: 0
Received 2 Likes on 2 Posts
Default Re: what have you guys done to adapt the FITV on to an aftermarket intake mani?

The FITV does not have any wiring. It is a mechanical device that raises cold idle and once the car warms up, it closes and does not affect idle in any way.

The IACV on the other hand, attaches to the back of the manifold. It adjusts air bypassing the TB to regulate idle all the time. It has wiring and is controlled by the ECU.

Last edited by gringo7718; 08-12-2009 at 08:22 AM.
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dohc4life
Honda CRX / EF Civic (1988 - 1991)
3
05-08-2011 11:42 AM
949
Honda CRX / EF Civic (1988 - 1991)
8
02-21-2011 07:03 PM
Joeski99Si
Honda Civic / Del Sol (1992 - 2000)
5
05-22-2008 06:40 PM
tgh22a
Honda Prelude
6
03-19-2005 03:43 PM



Quick Reply: what have you guys done to adapt the FITV on to an aftermarket intake mani?



All times are GMT -8. The time now is 03:08 AM.