Best Place to Get Headwork Done

trustdestruction · 05-15-2009, 09:22 PM

Hey guys, just to start with, I tried searching for threads on this and i'm sorry if this is a repost, and if it is maybe I didn't use the right search terms or something. If this has been covered and you know where the thread on it is, please kindly point me in that direction.

That being said, I have a JDM D15B head and i'm wanting to get a little work done on it. (3-angle valve job, hot tanked/cleaned, new seals, reassembly, and possibly a mild port & polish if the price isn't crazy high).

I'm wondering what shops you guys recommend. (preferably the types of shops that you contact via e-mail or phone and send in your head to get worked on)

I'm looking for the least expensive shop to go with that still does quality work. Trust me, i'm not looking to cheap out, just looking to get a good deal.

Thanks for any input you may have.

1.5Slowmatic · 05-15-2009, 09:26 PM

performance porting

trustdestruction · 05-15-2009, 09:48 PM

Thanks, it turns out that I actually have talked to him before on another forum and he really knows what he's talking about, and his prices are pretty good, so I sent him an e-mail.

riceburner700 · 05-16-2009, 12:00 AM

emailed you back

trustdestruction · 05-16-2009, 12:34 AM

replied

JayWest · 05-16-2009, 05:13 AM

Steve @ CCCylinderHeads.com

nytosc · 05-16-2009, 05:25 AM

Steve and RLZ seem to be the best from what I gather-

Teamdiesel · 05-16-2009, 05:30 AM

Endyn!

Phil M · 05-16-2009, 08:19 AM

Quote:

Originally Posted by Teamdiesel

Endyn!

x2

integrasirg94 · 05-16-2009, 09:03 AM

www.theoldone.com
Go through there site and read some of there articles. There is no one else I would rather have do that type of work then them. My friend alex had an engine done by them that was a 1.8 gsr that made 225 to the ground. cheap, fast, reliable..... Pic two, thats all you get.

crazes · 05-16-2009, 10:32 AM

steve from cccylinderheads.com is the ****

look at my thread and thats the head he did for me http://honda-tech.com/showthread.php?t=2525398&page=2 there my proof

kingofbattle909 · 05-16-2009, 10:40 AM

Quote:

Originally Posted by Teamdiesel

Endyn!

x3

team1320_k26eg · 05-16-2009, 10:50 AM

http://www.portflow.com/

thread over.

Combustion Contraption · 05-16-2009, 11:34 AM

90dxcrx · 05-16-2009, 12:58 PM

rlz

b20vtech · 05-16-2009, 03:00 PM

Me nuff said!!!!!! http://www.honda-tech.com/member.php?u=999448128

98vtec · 05-16-2009, 03:37 PM

i had my head done by steve and will hopefully have some dyno tests up as soon as my new headgasket arrives and i find time to put it on.

but, RLZ recommends Combustion Contraption if they do not want to wait for their work so that must tell you something about steves work.

I dont think you could go wrong with any of the following:

RLZ
CC
Endyn
Portflow
Mike Belben (if you can get him to do one for you, not sure of his status)

flesh199 · 05-16-2009, 03:56 PM

cc for sure

Combustion Contraption · 05-16-2009, 04:47 PM

Quote:

Originally Posted by BMo Tuning

melissa yenesel

And after all Ive done for you.

Fkned · 05-16-2009, 04:51 PM

Since you live in Fl you can go to Xtreme Cylinder Heads in Palm City. Bill knows his **** and has a Newen BB Contour for vj's.

**vinuneuro** · 05-16-2009, 06:48 PM

Take your pick.

RLZ
DonF
Fkned
CCC
Portflow
Endyn

omniman · 05-16-2009, 08:09 PM

Are you sure you need head work? with a basically stock motor thats daily driven there could be (well there are) other areas that would gain more power per dollar spent.

Vengeance · 05-17-2009, 12:42 AM

Quote:

Originally Posted by teamdiesel

endyn!

x4

HseriesWeaksauce · 05-17-2009, 04:25 PM

All these people that are saying endyn are halarious and probably didn't get work done with the. RLZ or Portflow are the best for head work and I can say that from experience. Endyn has done heads and lost power.

BeniRacing · 05-17-2009, 05:24 PM

Quote:

Originally Posted by HseriesWeaksauce

All these people that are saying endyn are halarious and probably didn't get work done with the. RLZ or Portflow are the best for head work and I can say that from experience. Endyn has done heads and lost power.

Yeah OK.... So Im assuming you have no experience with Endyn?
I assume you are ignoring all of the positive responses from the Endyn followers.
Oh and you prolly heard that Larry works out of his basement. Endyn is just a fake shop also.

All I will say is that the stuff they make works.

05-15-2009, 09:22 PM	#1
trustdestruction Honda-Tech Member Garage is empty, add now Join Date: Dec 2007 Location: FL Posts: 4,133 iTrader Rating: (0)	Best Place to Get Headwork Done Hey guys, just to start with, I tried searching for threads on this and i'm sorry if this is a repost, and if it is maybe I didn't use the right search terms or something. If this has been covered and you know where the thread on it is, please kindly point me in that direction. That being said, I have a JDM D15B head and i'm wanting to get a little work done on it. (3-angle valve job, hot tanked/cleaned, new seals, reassembly, and possibly a mild port & polish if the price isn't crazy high). I'm wondering what shops you guys recommend. (preferably the types of shops that you contact via e-mail or phone and send in your head to get worked on) I'm looking for the least expensive shop to go with that still does quality work. Trust me, i'm not looking to cheap out, just looking to get a good deal. Thanks for any input you may have. __________________ 2012 Civic Si Sedan – 9thCivic K24 Crew #46 \| FB6 Crew #3

05-15-2009, 09:48 PM	#3
trustdestruction Honda-Tech Member Garage is empty, add now Join Date: Dec 2007 Location: FL Posts: 4,133 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Thanks, it turns out that I actually have talked to him before on another forum and he really knows what he's talking about, and his prices are pretty good, so I sent him an e-mail. __________________ 2012 Civic Si Sedan – 9thCivic K24 Crew #46 \| FB6 Crew #3

05-16-2009, 12:00 AM	#4
riceburner700 Honda-Tech Member Garage is empty, add now Join Date: Jan 2007 Location: Loveland, CO, United States Posts: 520 iTrader Rating: (0)	Re: Best Place to Get Headwork Done emailed you back __________________ www.PerformancePorting.com We do custom cylinder head work for a reasonable price. Check us out on facebook also

05-16-2009, 12:34 AM	#5
trustdestruction Honda-Tech Member Garage is empty, add now Join Date: Dec 2007 Location: FL Posts: 4,133 iTrader Rating: (0)	Re: Best Place to Get Headwork Done replied __________________ 2012 Civic Si Sedan – 9thCivic K24 Crew #46 \| FB6 Crew #3

05-16-2009, 05:13 AM	#6
JayWest Honda-Tech Member Garage is empty, add now Join Date: Jan 2006 Location: S. Fla Posts: 2,694 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Steve @ CCCylinderHeads.com __________________ Stock Block All Motor H2B 11.32@117.9 Powered by Turbogixxer Tuning

Welcome to Honda-Tech!
		Welcome to Honda-Tech.com. You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!

05-16-2009, 05:25 AM	#7
nytosc Honda-Tech Member Garage is empty, add now Join Date: Mar 2008 Location: New York in the summer, South Carolina in the winter Posts: 2,266 iTrader Rating: (3)	Re: Best Place to Get Headwork Done Steve and RLZ seem to be the best from what I gather- __________________ 1.8t Audi

05-16-2009, 05:30 AM	#8
Teamdiesel Honda-Tech Member Garage is empty, add now Join Date: Jan 2006 Location: St. Georges, Antigua Posts: 1,838 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Endyn! __________________ 251whp 169.83wtq GSR built by Diesel Tuning!

05-16-2009, 09:03 AM	#10
integrasirg94 Junior Member Garage is empty, add now Join Date: Apr 2005 Location: Palm Coast, FL, USA Posts: 53 iTrader Rating: (0)	Re: Best Place to Get Headwork Done www.theoldone.com Go through there site and read some of there articles. There is no one else I would rather have do that type of work then them. My friend alex had an engine done by them that was a 1.8 gsr that made 225 to the ground. cheap, fast, reliable..... Pic two, thats all you get.

05-16-2009, 10:32 AM	#11
crazes Moderator Garage is empty, add now Join Date: Feb 2008 Location: queens, ny Posts: 2,376 iTrader Rating: (0)	Re: Best Place to Get Headwork Done steve from cccylinderheads.com is the ** look at my thread and thats the head he did for me http://honda-tech.com/showthread.php?t=2525398&page=2 there my proof __________________ www.rstech-racing.com www.importdpsonline.com www.4130fabrication.com**

05-16-2009, 10:50 AM	#13
team1320_k26eg Honda-Tech Member Garage is empty, add now Join Date: Oct 2006 Location: San Diego, Ca Posts: 3,597 iTrader Rating: (0)	Re: Best Place to Get Headwork Done http://www.portflow.com/ thread over. __________________ Team 1320 Est.1996 / GO-Pwr Motorsports / Skunk2 Racing "No nuts no glory, You can't achieve your goals if you don't take that chance"

05-16-2009, 11:34 AM	#14
Combustion Contraption Honda-Tech Member Garage is empty, add now Join Date: Jan 2003 Location: So Cal Posts: 10,171 iTrader Rating: (0)	Re: Best Place to Get Headwork Done __________________ EARL LASKEY, YOU WILL BE MISSED CCCylinderheads.com

05-16-2009, 12:58 PM	#15
90dxcrx Honda-Tech Member Garage is empty, add now Join Date: May 2009 Location: Kannapolis N.C Posts: 38 iTrader Rating: (0)	Re: Best Place to Get Headwork Done rlz

05-16-2009, 03:00 PM	#16
b20vtech Honda-Tech Member Garage is empty, add now Join Date: Aug 2005 Location: usa Posts: 3,524 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Me nuff said!!!!!! http://www.honda-tech.com/member.php?u=999448128 __________________ Need Affordable Head Porting & Engine Building? pm me!

05-16-2009, 03:37 PM	#17
98vtec Moderator 1998 Honda Prelude Join Date: Oct 2002 Posts: 15,051 iTrader Rating: (0)	Re: Best Place to Get Headwork Done i had my head done by steve and will hopefully have some dyno tests up as soon as my new headgasket arrives and i find time to put it on. but, RLZ recommends Combustion Contraption if they do not want to wait for their work so that must tell you something about steves work. I dont think you could go wrong with any of the following: RLZ CC Endyn Portflow Mike Belben (if you can get him to do one for you, not sure of his status) __________________ Blake Barr Got Facebook? Follow my build "Pride only breeds quarrels, but wisdom is found in those who take advice." Proverbs 13:10

05-16-2009, 03:56 PM	#18
flesh199 Honda-Tech Member Garage is empty, add now Join Date: Feb 2003 Location: rouyn noranda, quebec/canada Posts: 974 iTrader Rating: (0)	Re: Best Place to Get Headwork Done cc for sure __________________ allmotor k24/k20 built by me not bought

05-16-2009, 04:51 PM	#20
Fkned Member Garage is empty, add now Join Date: May 2003 Posts: 1,609 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Since you live in Fl you can go to Xtreme Cylinder Heads in Palm City. Bill knows his **** and has a Newen BB Contour for vj's.

05-16-2009, 06:48 PM	#21
vinuneuro ` Garage is empty, add now Join Date: Oct 2003 Location: Chicago Posts: 6,610 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Take your pick. RLZ DonF Fkned CCC Portflow Endyn

05-16-2009, 08:09 PM	#22
omniman Honda-Tech Member Garage is empty, add now Join Date: Jun 2003 Location: irvine, ca, usa Posts: 768 iTrader Rating: (0)	Re: Best Place to Get Headwork Done Are you sure you need head work? with a basically stock motor thats daily driven there could be (well there are) other areas that would gain more power per dollar spent. __________________ www.omnipowerusa.com www.intertune.tv your turbo MAP sensor source

05-17-2009, 04:25 PM	#24
HseriesWeaksauce Honda-Tech Member Garage is empty, add now Join Date: Dec 2008 Location: North Eastern US Posts: 219 iTrader Rating: (0)	Re: Best Place to Get Headwork Done All these people that are saying endyn are halarious and probably didn't get work done with the. RLZ or Portflow are the best for head work and I can say that from experience. Endyn has done heads and lost power.

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search

Honda and Acura Technical Forums

Best Place to Get Headwork Done