**skipunk4's mr dc4 2010 refresh - Spoon / Enkei / Innovative / ASC Metal Fab**
#126
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Phil_Eg)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JDMkidGSR »</TD></TR><TR><TD CLASS="quote">BUMP...where are the updates, Id go help you out but I live too far dude...lol.</TD></TR></TABLE>
THERE HERE! lol but what are you talkin about Texas is like 3 states away..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil_Eg »</TD></TR><TR><TD CLASS="quote">Awesome build, coming along nice. </TD></TR></TABLE>
Thanks
Updates:
I had the holes on the driver side of the hatch shaved, so its just the main Honda "H" logo in the center. Looks a lot better IMO.
I also finally got around to putting on all of the lower rear suspension stuff... I have been super busy workin and stuff and I finally had time to do it so here it is.
(Don't mind the filthyness, she needs a good wash)
The hardware: I ended up using the stock end links because the Blox ones were crap lol
Before:
During:
After:
Complete:
Im really happy with how it all turned out.. It feels soooo much better!
Page 6 bumpage
Modified by skipunk4 at 1:02 PM 8/10/2008
THERE HERE! lol but what are you talkin about Texas is like 3 states away..
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil_Eg »</TD></TR><TR><TD CLASS="quote">Awesome build, coming along nice. </TD></TR></TABLE>
Thanks
Updates:
I had the holes on the driver side of the hatch shaved, so its just the main Honda "H" logo in the center. Looks a lot better IMO.
I also finally got around to putting on all of the lower rear suspension stuff... I have been super busy workin and stuff and I finally had time to do it so here it is.
(Don't mind the filthyness, she needs a good wash)
The hardware: I ended up using the stock end links because the Blox ones were crap lol
Before:
During:
After:
Complete:
Im really happy with how it all turned out.. It feels soooo much better!
Page 6 bumpage
Modified by skipunk4 at 1:02 PM 8/10/2008
Last edited by skipunk4; 12-11-2008 at 03:42 PM.
#128
Honda-Tech Member
Join Date: Sep 2002
Location: Antarctica
Posts: 988
Likes: 0
Received 0 Likes
on
0 Posts
wow..that seriously looks fantastic. What did you notice as far as handling? quickend up the response at all? Im craving a nice "go kart" type feel. will be doing the same setup.
amazing work as usual man!
amazing work as usual man!
#129
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (Na-Spirit)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sac ped »</TD></TR><TR><TD CLASS="quote">its coming along real nice. hope to see more updates. good luck </TD></TR></TABLE>
Thanks man. I'll have more updates soonish.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Na-Spirit »</TD></TR><TR><TD CLASS="quote">wow..that seriously looks fantastic. What did you notice as far as handling? quickend up the response at all? Im craving a nice "go kart" type feel. will be doing the same setup.
amazing work as usual man! </TD></TR></TABLE>
Oh man it is soo much stiffer in the rear. It is really funny when you compare the stock LS sway bar to the ITR. Next is the front sway bar. Since the rear made such a big difference I gotta do the front lol.
Goin on vacation bump! takin a week off. Time for some relaxation. See you guys in a week
Thanks man. I'll have more updates soonish.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Na-Spirit »</TD></TR><TR><TD CLASS="quote">wow..that seriously looks fantastic. What did you notice as far as handling? quickend up the response at all? Im craving a nice "go kart" type feel. will be doing the same setup.
amazing work as usual man! </TD></TR></TABLE>
Oh man it is soo much stiffer in the rear. It is really funny when you compare the stock LS sway bar to the ITR. Next is the front sway bar. Since the rear made such a big difference I gotta do the front lol.
Goin on vacation bump! takin a week off. Time for some relaxation. See you guys in a week
#130
Honda-Tech Member
iTrader: (1)
Join Date: Jan 2002
Location: Nowhere and Everywhere
Posts: 29,530
Likes: 0
Received 52 Likes
on
46 Posts
Re: (skipunk4)
The front sway bar may be the same 24mm as the GS-R and ITR have in front, depending on the year. If not, it's a 22mm front bar. So I dunno if it would be worth changing or not.
Good choice on using the stock end links. They're a much better fit than all these aftermarket adjustable links that look like they'll bend quite easily and bind up.
Good choice on using the stock end links. They're a much better fit than all these aftermarket adjustable links that look like they'll bend quite easily and bind up.
#133
Honda-Tech Member
Join Date: Aug 2006
Location: San Francisco, ca, usa
Posts: 1,011
Likes: 0
Received 0 Likes
on
0 Posts
Re: (benny32gsr)
Sorry that i was "regurgitating wrong info", just trying to help.
Modified by pkdog167 at 1:53 AM 8/13/2008
Modified by pkdog167 at 2:02 AM 8/13/2008
Modified by pkdog167 at 1:53 AM 8/13/2008
Modified by pkdog167 at 2:02 AM 8/13/2008
#134
Honda-Tech Member
Join Date: Jun 2004
Location: Laredo,Texas
Posts: 1,432
Likes: 0
Received 0 Likes
on
0 Posts
Re: (pkdog167)
About time you put it on, Looks really good
The fronts the same, I dont know. I wouldnt change it, only thing id do is slapp on some poly bushings all in the front and call it a day
The fronts the same, I dont know. I wouldnt change it, only thing id do is slapp on some poly bushings all in the front and call it a day
#135
Honda-Tech Member
Re: (pkdog167)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by pkdog167 »</TD></TR><TR><TD CLASS="quote">94-01 integra ls all have 22mm sway bar, they just have different rear sway bar.
Taken from the other forum, enjoy.
Compatible factory sway bar sizing:
Front:
1994-2001 Integra LS: 22mm
1994-2001 Integra GSR: 24mm
1996-2001 Integra Type R: 24mm
Rear:
1994-1999 Integra LS: 13mm
2000-2001 Integra LS: 14mm
1994-2001 Integra GSR: 14mm
1996-2001 Integra Type R: 23mm (JDM) 22mm (USDM)</TD></TR></TABLE>
stop regurgitating wrong info, there were updates to 00-01 integras (ALL of them), as previously mentioned, the front bar is 24mm on this particular integra.
as for the OP, you'll actually feel an improvement, if you "downgrade" to an older 22mm front sway bar from an older integra.
I did the same to my first integra.
Taken from the other forum, enjoy.
Compatible factory sway bar sizing:
Front:
1994-2001 Integra LS: 22mm
1994-2001 Integra GSR: 24mm
1996-2001 Integra Type R: 24mm
Rear:
1994-1999 Integra LS: 13mm
2000-2001 Integra LS: 14mm
1994-2001 Integra GSR: 14mm
1996-2001 Integra Type R: 23mm (JDM) 22mm (USDM)</TD></TR></TABLE>
stop regurgitating wrong info, there were updates to 00-01 integras (ALL of them), as previously mentioned, the front bar is 24mm on this particular integra.
as for the OP, you'll actually feel an improvement, if you "downgrade" to an older 22mm front sway bar from an older integra.
I did the same to my first integra.
#138
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (jepjep)
Originally Posted by PatrickGSR94
The front sway bar may be the same 24mm as the GS-R and ITR have in front, depending on the year. If not, it's a 22mm front bar. So I dunno if it would be worth changing or not.
Good choice on using the stock end links. They're a much better fit than all these aftermarket adjustable links that look like they'll bend quite easily and bind up.
Good choice on using the stock end links. They're a much better fit than all these aftermarket adjustable links that look like they'll bend quite easily and bind up.
Originally Posted by Dredakid05
NICE SETUP!!!
Originally Posted by benny32gsr
looks good
Originally Posted by pkdog167
Sorry that i was "regurgitating wrong info", just trying to help.
Originally Posted by JDMkidGSR
About time you put it on, Looks really good
The fronts the same, I dont know. I wouldnt change it, only thing id do is slapp on some poly bushings all in the front and call it a day
The fronts the same, I dont know. I wouldnt change it, only thing id do is slapp on some poly bushings all in the front and call it a day
Originally Posted by Spec R
stop regurgitating wrong info, there were updates to 00-01 integras (ALL of them), as previously mentioned, the front bar is 24mm on this particular integra.
as for the OP, you'll actually feel an improvement, if you "downgrade" to an older 22mm front sway bar from an older integra.
I did the same to my first integra.
as for the OP, you'll actually feel an improvement, if you "downgrade" to an older 22mm front sway bar from an older integra.
I did the same to my first integra.
Originally Posted by 9KRevLimitDC2
Hells yea smaller is so much better in the front!
Originally Posted by jepjep
its getting better and better, good progress
Thanks for all the input guys, it is much appreciated
As for updates hopefully I will have something here pretty quick
Random older pic..
#139
Honda-Tech Member
Join Date: Jul 2006
Location: Layton, Utah, US
Posts: 331
Likes: 0
Received 0 Likes
on
0 Posts
Re: (skipunk4)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by skipunk4 »</TD></TR><TR><TD CLASS="quote">Random older pic..
</TD></TR></TABLE>
Your car's stance is perfect. I love it. The most function, with the nicest form.
</TD></TR></TABLE>
Your car's stance is perfect. I love it. The most function, with the nicest form.
#141
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (sLoW DC2_uk)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by DC4 Dave »</TD></TR><TR><TD CLASS="quote">Your car's stance is perfect. I love it. The most function, with the nicest form.</TD></TR></TABLE>
ha ha thanks man, I feel like it could go lower in the rear, but the front sits perfect to me.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sLoW DC2_uk »</TD></TR><TR><TD CLASS="quote">nice work mate, love this car, keep it up </TD></TR></TABLE>
Thanks I will do my best
No updates yet just a random pic I took of the car on vacation..
Wake up Honda-tech
ha ha thanks man, I feel like it could go lower in the rear, but the front sits perfect to me.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by sLoW DC2_uk »</TD></TR><TR><TD CLASS="quote">nice work mate, love this car, keep it up </TD></TR></TABLE>
Thanks I will do my best
No updates yet just a random pic I took of the car on vacation..
Wake up Honda-tech
#146
Honda-Tech Member
Join Date: May 2007
Location: 8-4-5 New York
Posts: 4,728
Likes: 0
Received 0 Likes
on
0 Posts
Re: (9KRevLimitDC2)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9KRevLimitDC2 »</TD></TR><TR><TD CLASS="quote">Engrish </TD></TR></TABLE>
Hahah!
Hahah!
#148
damn dude your ***** so clean. I think I've seen you drivin round oly before. we should hang out or somethin. keep up the goodwork when you gonna have an update. I'm lookin forward to it.
#149
Honda-Tech Member
Thread Starter
Join Date: May 2007
Location: MrKrispy
Posts: 1,081
Likes: 0
Received 0 Likes
on
0 Posts
Re: (RBds14)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9KRevLimitDC2 »</TD></TR><TR><TD CLASS="quote">I love that brace i cant wait to get mine </TD></TR></TABLE>
Dude it makes a big difference.. My opinion anyways lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g3teg97 »</TD></TR><TR><TD CLASS="quote">Any new updates?</TD></TR></TABLE>
Not yet...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ricoswav86 »</TD></TR><TR><TD CLASS="quote">that **** look nice but y was u removing all that stuff out of the bay </TD></TR></TABLE>
Seriously? Just cleanin it up lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9KRevLimitDC2 »</TD></TR><TR><TD CLASS="quote">Engrish </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil_Eg »</TD></TR><TR><TD CLASS="quote">Hahah! </TD></TR></TABLE>
^haha nice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99SIFry »</TD></TR><TR><TD CLASS="quote">Any complaints for daily driving with that suspension settup? Keep up the good work, Teg is looking good. </TD></TR></TABLE>
Its a little bumpy here and there, but it is pretty smooth. I don't mind it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RBds14 »</TD></TR><TR><TD CLASS="quote">damn dude your ***** so clean. I think I've seen you drivin round oly before. we should hang out or somethin. keep up the goodwork when you gonna have an update. I'm lookin forward to it. </TD></TR></TABLE>
Thanks man. What do you drive? I've probly seen you around
Anyways no new updates... Car is basically on hold for a little while so I can save up and do something worth while.
Although I am workin on this... stupid moisture leak
Soo I WAS supposed to go to the Seattle HT meet today but I gotta work
Modified by skipunk4 at 2:59 PM 9/6/2008
Dude it makes a big difference.. My opinion anyways lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by g3teg97 »</TD></TR><TR><TD CLASS="quote">Any new updates?</TD></TR></TABLE>
Not yet...
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by ricoswav86 »</TD></TR><TR><TD CLASS="quote">that **** look nice but y was u removing all that stuff out of the bay </TD></TR></TABLE>
Seriously? Just cleanin it up lol
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 9KRevLimitDC2 »</TD></TR><TR><TD CLASS="quote">Engrish </TD></TR></TABLE>
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Phil_Eg »</TD></TR><TR><TD CLASS="quote">Hahah! </TD></TR></TABLE>
^haha nice
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 99SIFry »</TD></TR><TR><TD CLASS="quote">Any complaints for daily driving with that suspension settup? Keep up the good work, Teg is looking good. </TD></TR></TABLE>
Its a little bumpy here and there, but it is pretty smooth. I don't mind it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by RBds14 »</TD></TR><TR><TD CLASS="quote">damn dude your ***** so clean. I think I've seen you drivin round oly before. we should hang out or somethin. keep up the goodwork when you gonna have an update. I'm lookin forward to it. </TD></TR></TABLE>
Thanks man. What do you drive? I've probly seen you around
Anyways no new updates... Car is basically on hold for a little while so I can save up and do something worth while.
Although I am workin on this... stupid moisture leak
Soo I WAS supposed to go to the Seattle HT meet today but I gotta work
Modified by skipunk4 at 2:59 PM 9/6/2008