♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
06-09-2014, 10:17 AM
Honda-Tech Member
Join Date: Dec 2003
Location: The streets of...ROY, UT
Posts: 1,061
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
Thanks man. I didn't even think about that till I really started racking my brain. I just need to depin the whole d/s plug and pull it in and then repin it back inside the cabin. I don't really want to do anything irreversible.
06-12-2014, 07:53 PM
Honda-Tech Member
Join Date: Nov 2010
Location: Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
I know I'll get flamed for this, but I did search.
I'm in the process of tucking my eg coupe. I've got a build thread in the appearance build thread section if you want to check it out so you can see what I'm having difficulty with.
The part numbers for the firewall plugs are not working for my car. Only the ac plug and the cruise control plug fit. I ordered:
91610-SF4-003 - Too big for the passenger engine harness hole.
91631-SR3-000 - Worked fine.
90621-SE0-000 - Too small for driver side engine harness hole.
And before someone asks, yes I tried to use the passenger side on the driver side and vice versa. Any help would be greatly appreciated.
I'm in the process of tucking my eg coupe. I've got a build thread in the appearance build thread section if you want to check it out so you can see what I'm having difficulty with.
The part numbers for the firewall plugs are not working for my car. Only the ac plug and the cruise control plug fit. I ordered:
91610-SF4-003 - Too big for the passenger engine harness hole.
91631-SR3-000 - Worked fine.
90621-SE0-000 - Too small for driver side engine harness hole.
And before someone asks, yes I tried to use the passenger side on the driver side and vice versa. Any help would be greatly appreciated.
06-12-2014, 08:27 PM
Honda-Tech Member
Join Date: May 2012
Location: Michigan
Posts: 375
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
The passenger side one should fit with some work. I think it seemed a little big for the hole on mine as well, but I was able to get it there.
The 90621-SE0-000 is for the EK driver side. I did the same thing and ordered it thinking that it was what I needed. I think I read somewhere that there's a mustang plug that fits that hole. I'm not sure exactly where I found it, but it should be findable again.
The 90621-SE0-000 is for the EK driver side. I did the same thing and ordered it thinking that it was what I needed. I think I read somewhere that there's a mustang plug that fits that hole. I'm not sure exactly where I found it, but it should be findable again.
06-12-2014, 11:53 PM
Steve at Heart
Search for mustang bumper plugs. Tousley ford/ white bear lake auto nation or horizon ford have pretty good deals as well. Check through there online programs. Otherwise autofair honda may be able to help as they are affiliated with a ford dealer and honda-tech sponsor.
06-13-2014, 02:31 AM
Honda-Tech Member
Join Date: Nov 2010
Location: Ohio
Posts: 16
Likes: 0
Received 0 Likes
on
0 Posts
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
The passenger side one should fit with some work. I think it seemed a little big for the hole on mine as well, but I was able to get it there.
The 90621-SE0-000 is for the EK driver side. I did the same thing and ordered it thinking that it was what I needed. I think I read somewhere that there's a mustang plug that fits that hole. I'm not sure exactly where I found it, but it should be findable again.
The 90621-SE0-000 is for the EK driver side. I did the same thing and ordered it thinking that it was what I needed. I think I read somewhere that there's a mustang plug that fits that hole. I'm not sure exactly where I found it, but it should be findable again.
I made the passenger side for but it's about 1/4" too long so now that it's in it's all bulged out and just generally looks bad and probably isn't going to seal anything.
07-08-2014, 05:23 AM
Honda-Tech Member
07-08-2014, 01:51 PM
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
I can finally post in this thread! sorry for the game boy camera quality pics. Just need to install the rad button up a few odd ends and install the clutch master cylinder
07-28-2014, 07:56 PM
Honda-Tech Member
Re: ♠ Shaved, Tucked, Customized Engine Bays - Pics, Theory, Discussion ♠
