PrettyMuchBoned

I'm sure you all already hate me for asking the same old question for the 1,000,000th time, sorry for that.

I was advised by eghatch to pick up Integra spindles/control arms/sway bars for my EG-DX coupe, is there a any other options I should consider to get bigger brakes and stouter suspension for muh civic? I read to use type R calipers (thinking about re-man lifetime warrantee raysbestos) with x & x disks. But I wouldn't mind going bigger, yakno?

I am budget conscious, or at least cost-benefit-ratio concerned.

thx in advanced fellas

p.s. Does anyone know if a 94+ Integra front subframe is a direct bolt in for my civic? It'd be easier for me to just take it out that way.

redlinetuning

Please read some of the stickies. What is your budget for all of this? You could end up spending $3000 easily on brakes and suspension if you're serious. The eg and dc subframe / rack should be the same, minus the power steering.

cetcivic

Just get the brembo caliper covers on ebay
much bling factor
such wow

PrettyMuchBoned

yup that's more than half the budget for the car. I did end up getting a 95 teg subframe, since a cap nut on mine broke off as I replaced the LCAs, plus i got the brace and sway bar too.

I got a quote from a couple salvage yards and they wanted aprox. 250$ for all the knuckles/LCAs, sway bars, etc of out an Integra. That would be well under budget so I would wanna still do more than just that. My limit for every would prolly be around 500-700.
which doesn't include struts/springs or coils. That's just the other stuff like spindles and crap

egsleepercivic

replace all the bushings with OEM, Hardrace, PIC, or SUJA rubber bushings