Go Back   Honda-Tech > Honda and Acura Model-Specific Technical Forums > Honda CRX / EF Civic (1988-1991)
Sign in using an external account
Register Forgot Password?
Search


Welcome to Honda-Tech!
Welcome to Honda-Tech.com.

You are currently viewing our forums as a guest, which gives you limited access to view most discussions and access our other features. By joining our community you will have access to post topics, communicate privately with other members (PM), respond to polls, upload content and access many other special features. Registration is fast, simple and absolutely free so please, join the Honda-Tech community today!


Reply
 
 
 
submit to reddit
 
Thread Tools Search this Thread
Old 09-06-2012, 03:39 PM   #1
Jovan Guerrero
Trial User
Garage is empty, add now
 
Join Date: Sep 2012
Location: Wisconsin
Posts: 1
iTrader Rating: (0)
Icon2 91 honda civic ls low compression

New to the this so im hoping I am posting in the correct thread. I have a 91 honda civic with a swapped ls b18a1. I got it thinking there was a blowen head gasket. It was odd tho only white steam/smoke would come out when i turn i drove it two hours and dident have any smoke or overheating. but when i turn white steam/smoke would come out in massive amounts. So i took the head off put a new gasket on started her up and my whole car shakes and it sounded like a diesel truck on idle when i gave it gas it sounded fine. took it around the block a few time did some turn n white smoke agian... Did a compression test and #4 cylinder was only pushing 50 psi and the other three where holding around 175. I took my head off and my valves looked fine i put water in and it held. the other thought was maybe bad piston ring but i took a lot on the walls and there was no marks or scratches. i dont see why a pistion ring would go out just like that either because it was fine before. i thought maybe it was the head gasket because i did not do the torque sequence order. so i out a new one on and did the order. started it up nothing. did a compression test agian. #4 cylinder 25 psi the other three are at about 90 psi... What could be going on???
Jovan Guerrero is offline   Reply With Quote
 
 
 
submit to reddit
Reply

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Forum Jump

Similar Threads
Thread Thread Starter Forum Replies Last Post
My 1999 Civic si rebuild story steveeb Honda Civic/Del Sol (1992 - 2000) 2 05-27-2013 11:04 AM
Compression/Injector Help michaelm130 Honda Civic/Del Sol (1992 - 2000) 1 05-26-2013 12:39 AM
1999 Civic SI compression question steveeb Honda Civic/Del Sol (1992 - 2000) 5 05-02-2013 07:40 AM
time for new rings? rice a roni Forced Induction 9 11-18-2012 10:49 AM
2000 ex pours out white smoke protopro88 Tech/Misc 6 09-19-2012 12:58 AM



All times are GMT -8. The time now is 10:15 PM.



2008 Copyright, InternetBrands Inc.
Powered by vBulletin® Version 3.7.4
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.

Honda and the Honda marquee are registered trademarks of the American Honda Motor Company, Inc. Neither American Honda Motor Company nor its subsidiaries or affiliates shall bear any responsibility for Honda-Tech.com content, comments, or advertising. Honda-Tech.com is not affiliated with American Honda Motor Company in any way. American Honda Motor Company does not sponsor, support, or endorse Honda-Tech.com in any way. Copyright/trademark/sales mark infringements are not intended or implied.
Emails & Contact Details