Obd1 injectors in an obd2 motor
#1
Honda-Tech Member
Thread Starter
Obd1 injectors in an obd2 motor
I just bought an obd2 jdm GSR B18c from hmotors to replace my old GSR. Thing is hmotors only had obd2 motors and not obd1 like I need. I was told to convert the obd2 motor to obd1 motor I need an obd1 alternator and dizzy which I have. But I do not have obd1 injectors. My question is, which injectors do I need to make it work, will any obd1 injectors work in a jdm obd2 engine?
#4
Honda-Tech Member
Join Date: Jan 2012
Location: Lancashire, England
Posts: 55
Likes: 0
Received 0 Likes
on
0 Posts
Re: Obd1 injectors in an obd2 motor
i have a set of obd0 injectors from my old b16a1 engine (UKDM), i was going to put them in my b18c6 itr (as i dropped one and broke the tip) but iv managed to cross reference the part numbers but they are different, so i then cross referenced the numbers with an obd1 set (from a b16a2 vti ukdm) and yet again all three sets are different. i dont know whats different about them because they all look the same visually and thought they all were 240cc/min.
#5
Honda-Tech Member
Re: Obd1 injectors in an obd2 motor
obd0 injectors require a resistor box, obd1 and obd2 injectors are the same but have a different connector on it and neither require a resistor box.
Thread
Thread Starter
Forum
Replies
Last Post