Brian Crower Stroker Kit for b20
#1
Honda-Tech Member
Thread Starter
Join Date: Dec 2010
Location: Arkansas
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
Brian Crower Stroker Kit for b20
http://www.maperformance.com/brian-c...s-bc0027..html
Has anyone used this kit by any chance, or their products? The price seems a little high, but I am not worried about it if they have a good product. New to the engine scene, so I am learning. Thank you in advance for any input.
Has anyone used this kit by any chance, or their products? The price seems a little high, but I am not worried about it if they have a good product. New to the engine scene, so I am learning. Thank you in advance for any input.
#3
Honda-Tech Member
Join Date: Aug 2003
Location: cville, va, usa
Posts: 1,420
Likes: 0
Received 0 Likes
on
0 Posts
Re: Brian Crower Stroker Kit for b20
The kit is fine. We purchased two of the kits 5 years ago or so. The rods are a little longer and the compression height on the pistons are lower for a better R/S. I can say we had one of the kits sent off to be balanced before assembly. The total displacement was around 2.15 ltrs with 13:1 compression. With crower cams The motor made 256hp on one motor. I sold mine to someone that used it in a b18c (84mm 12:1cr 95mm stroke) and made 235hp with pro series cams I believe.
Thread
Thread Starter
Forum
Replies
Last Post
90 integra
All Motor / Naturally Aspirated
9
10-08-2004 03:26 AM
stale1 '01 itr 616
All Motor / Naturally Aspirated
16
08-17-2003 08:20 PM