Looking for Plasma Cutter / Tig Welder, Possibly a two in one unit.
#1
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: Youngstown, OH, USA
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
Looking for Plasma Cutter / Tig Welder, Possibly a two in one unit.
Just kinda examining my options. I really like the miller stuff but the price is definatly gonna be tuff if i go that route.
Requirements:
Must be able to cut 3/8 inch steel without any problems
Must be able to Tig stainless & aluminum 1/4 inch
Any suggestions welcome. I'm pretty much clueless as to what i want.
Thanks
Requirements:
Must be able to cut 3/8 inch steel without any problems
Must be able to Tig stainless & aluminum 1/4 inch
Any suggestions welcome. I'm pretty much clueless as to what i want.
Thanks
#2
Honda-Tech Member
Join Date: Mar 2001
Location: Phoenix, AZ, USA
Posts: 2,708
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Plasma Cutter / Tig Welder, Possibly a two in one unit. (Running925)
This may be news to me, but does such a machine even exist?
Otherwise, I'd look at the Miller Dynasty (inverter) for a small tig that will do both steel and aluminum, and there are a wide selection of plasma cutters out there..
Otherwise, I'd look at the Miller Dynasty (inverter) for a small tig that will do both steel and aluminum, and there are a wide selection of plasma cutters out there..
#3
Honda-Tech Member
Join Date: Oct 2004
Location: Sacramento, CA, USA
Posts: 157
Likes: 0
Received 0 Likes
on
0 Posts
http://www.parkermetalworking.com
http://www.rilandusa.com/?p=Products
I have never used their products and have no idea about their quality, but those are websites to companies that sell Plasma cutter/ACDC welder combo. It's chinese stuff. If you're fine with that, I'd recomend you research their track record before buying them. Thought I'd throw it out there anyway. I don't think any reputable companies that are based in North America make a combo unit such as the one you want.
Personally, I'd recomend buying a used brand name AC/DC welder (square way or inverter) with a water cooled torch setup. And a plasma cutter separetly.
ps: If you don't know how to tig, I'd recomend you take a class from a community college if that's available to you. In the end it will save you a lot of time, money, frustration, and answer all of your questions. You'll be a better welder a lot quicker.
Modified by preludeserge at 3:50 AM 11/2/2007
http://www.rilandusa.com/?p=Products
I have never used their products and have no idea about their quality, but those are websites to companies that sell Plasma cutter/ACDC welder combo. It's chinese stuff. If you're fine with that, I'd recomend you research their track record before buying them. Thought I'd throw it out there anyway. I don't think any reputable companies that are based in North America make a combo unit such as the one you want.
Personally, I'd recomend buying a used brand name AC/DC welder (square way or inverter) with a water cooled torch setup. And a plasma cutter separetly.
ps: If you don't know how to tig, I'd recomend you take a class from a community college if that's available to you. In the end it will save you a lot of time, money, frustration, and answer all of your questions. You'll be a better welder a lot quicker.
Modified by preludeserge at 3:50 AM 11/2/2007
#4
Honda-Tech Member
Join Date: Apr 2005
Location: Lincoln, Ne, USA
Posts: 1,895
Likes: 0
Received 0 Likes
on
0 Posts
Re: Looking for Plasma Cutter / Tig Welder, Possibly a two in one unit. (Running925)
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Running925 »</TD></TR><TR><TD CLASS="quote">Just kinda examining my options. I really like the miller stuff but the price is definatly gonna be tuff if i go that route.
Requirements:
Must be able to cut 3/8 inch steel without any problems
Must be able to Tig stainless & aluminum 1/4 inch
Any suggestions welcome. I'm pretty much clueless as to what i want.
Thanks
</TD></TR></TABLE>
To GTAW 1/4" aluminum you're gonna need something with some serious power. How much are you looking to spend?
Requirements:
Must be able to cut 3/8 inch steel without any problems
Must be able to Tig stainless & aluminum 1/4 inch
Any suggestions welcome. I'm pretty much clueless as to what i want.
Thanks
</TD></TR></TABLE>
To GTAW 1/4" aluminum you're gonna need something with some serious power. How much are you looking to spend?
#5
Honda-Tech Member
Thread Starter
Join Date: Jan 2005
Location: Youngstown, OH, USA
Posts: 855
Likes: 0
Received 0 Likes
on
0 Posts
well guys after doing some research and looking at the suggested 2 in 1 options, i decided to go with seperate units.
I picked up a Miller Spectrum 375 for about $750 slightly used
Now i'm gonna start hunting for a good deal on a Miller Tig.
I really like the Dynasty 200 DX, but i'm gonna have to hold off until i can afford it or i find a good killer deal on one. Until then, i'll be sticking with my Mig welder.
thanks for the help guys.
I picked up a Miller Spectrum 375 for about $750 slightly used
Now i'm gonna start hunting for a good deal on a Miller Tig.
I really like the Dynasty 200 DX, but i'm gonna have to hold off until i can afford it or i find a good killer deal on one. Until then, i'll be sticking with my Mig welder.
thanks for the help guys.
Thread
Thread Starter
Forum
Replies
Last Post