Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 4
1
2
3
Last »
Search: Posts Made By: apexi_bb6
Showing results 1 to 25 of 91
Search took 0.57 seconds.
Forum: Honda Prelude
08-05-2012, 04:23 PM
Replies: 2
Views: 1,094
Posted By apexi_bb6

Re: Euro R Prelude Front End (Hubs/Spindles/Rotor/Calipers/Etc)

Real difference is base model to type sh or JDM type s. The latter has lower springs and shocks (not by much) dual lower ball joints in front, and a few other minor differences. IIRC the type s had...
Forum: Honda Prelude
08-04-2012, 07:56 AM
Replies: 3
Views: 3,716
Posted By apexi_bb6

Re: help finding a beaks bar for a 5th gen prelude!

If you are looking for the piece that braces the inside mounts of the lower control arms then you can use a 4th gen prelude bar (beaks, DC, vibrant, etc...) and buy the two lower control arm bolts...
Forum: Honda Prelude
07-14-2012, 08:48 AM
Replies: 7
Views: 1,208
Posted By apexi_bb6

Re: Restoring the lude

If it's a 5th gen then search for JDM prelude SiR red interrior. Red interior was a factory option in japan and mabey europe. It looks pretty good with black seats, but is alittle much with all red...
Forum: All Motor / Naturally Aspirated
07-07-2012, 02:26 PM
Replies: 5
Views: 4,936
Posted By apexi_bb6

Re: who modifies k24 crank to fit h series block

I thought the K20 rods were too wide to use without modding the crank, but most of my info was on my old laptop, I've put everything on hold for now pending my continued employment. Don't know how...
Forum: All Motor / Naturally Aspirated
07-07-2012, 07:43 AM
Replies: 5
Views: 4,936
Posted By apexi_bb6

Re: who modifies k24 crank to fit h series block

I have been wanting to know this myself, asked and looked my self a few times but never got an answer. If rosko does do the modifications he will definately be getting more of my money.

Ended up...
Forum: Honda Prelude
06-25-2012, 06:49 PM
Replies: 44
Views: 61,317
Posted By apexi_bb6

Re: Pros and Cons of an H22 Prelude

Ive had my 98 base for about 8 years now. Dont see getting rid of it anytime soon. Ive put about 70-80k miles on it personally and Im sitting at about 211,xxx miles. Besides replacing worn...
Forum: Honda Prelude
06-02-2012, 12:28 PM
Replies: 11
Views: 1,548
Posted By apexi_bb6

Re: glasspack help!

Mabey it was 18" resonator, its at my shop and I bought it months ago but it looked bigger. I bought it through Rosko racing with my EuroR mani, but his new site isnt finished so it would be best to...
Forum: Honda Prelude
06-01-2012, 01:43 PM
Replies: 11
Views: 1,548
Posted By apexi_bb6

Re: glasspack help!

I have a 3 foot glass pack under my Volkswagen, but Im still using the giant factory cat. They come in all shapes and sizes. Mine was huge and cheap. About $35 shipped from jeggs or summit, if you...
Forum: Honda Prelude
05-23-2012, 08:15 AM
Replies: 9
Views: 2,932
Posted By apexi_bb6

Re: h23a1 crank pully

Well, just remembered I have a f23 crank in the block on the stand. Dont know how that changes things. Ill look and see if I have an h22a4 pulley boxed up somewhere and see if it fits on my h23. I...
Forum: Honda Prelude
05-23-2012, 07:29 AM
Replies: 9
Views: 2,932
Posted By apexi_bb6

Re: h23a1 crank pully

Not sure about 4th gen h22 crank pulley but neither of my h23 crank pulleys fit my friends 97 sh prelude (h22a4). Havent tried it on my 98 base though, it may be different I never cross referenced...
Forum: All Motor / Naturally Aspirated
05-18-2012, 09:15 AM
Replies: 130
Views: 37,298
Posted By apexi_bb6

Re: DD-tech cams

Read through this thread a week or two ago and dont remember seeing anything on h23dohc/ f22sohc non vtec cams. Im in the research/ feasibility phase of my next project and was wondering if you...
Forum: All Motor / Naturally Aspirated
05-17-2012, 04:00 PM
Replies: 98
Views: 17,194
Posted By apexi_bb6

Re: Products you would like to see but never will.

I would really like some cam phasers for h/b motors (Pref. Intake and exhaust). Ford is really getting some good results from an OEM standpoint with dual phasers (Im a ford tech, Im sure other...
Forum: Honda Prelude
05-17-2012, 12:42 PM
Replies: 2
Views: 1,684
Posted By apexi_bb6

Re: Is Euro-R intake manifold obd2 compliant?

The problem I came across was tunning. It really needs that to run right, and if you are using the EuroR injectors and rail Im not sure if a vafc would be sufficient (someone correct me if Im...
Forum: Honda Prelude
05-14-2012, 10:52 AM
Replies: 12
Views: 15,080
Posted By apexi_bb6

Re: Will a f22 oil pan fit a h22

I havent had any oil problems, but ive always used the pan that came with the motor. Ive never looked up part numbers but found 3-4 different threads on multiple sites with issues from using the...
Forum: Honda Prelude
05-12-2012, 05:26 PM
Replies: 12
Views: 15,080
Posted By apexi_bb6

Re: Will a f22 oil pan fit a h22

My h23 pan(steel) fits on my h22a4(aluminium) but the oil pickup is in a slightly different location. I have also heard of people having oil pressure issues with using a steel h22 pan on a late...
Forum: Honda Prelude
05-12-2012, 05:11 PM
Replies: 10
Views: 9,423
Posted By apexi_bb6

Re: H22 timing belt tensioner

I have both the h23 and kazeenspeed setups for my motor and the kazeenspeed is alittle easier to install with a thicker HG. By time I wrestled the belt over the h23 setup there was little needed...
Forum: Honda Prelude
05-12-2012, 03:13 PM
Replies: 10
Views: 9,423
Posted By apexi_bb6

Re: H22 timing belt tensioner

Buy a h23 tensioner setup or kazenspeed, at this point I wouldnt trust the hydraulic tensioner. Allot of people dont even trust the hydraulic ones brand new and properly installed.
Forum: Honda Prelude
05-10-2012, 06:28 PM
Replies: 8
Views: 4,093
Posted By apexi_bb6

Re: G23 options "without" an "H" head. ideas?

Whats the need for the F23 motor, Circle track? As far as keeping the F23 Head goes you are limited in potential, no cam choices (you could contact Gude, they may be able to re-grind something for...
Forum: Honda Prelude
05-10-2012, 09:18 AM
Replies: 8
Views: 4,093
Posted By apexi_bb6

Re: G23 options "without" an "H" head. ideas?

I recently combined a h22a4 and a f23(a1 I believe) using h22 block and head with f23 crank and rods with h22 pistons, with OE head gasket .026" the comp was back calc'd at 12.1:1 and about 11.6-7:1...
Forum: Honda Prelude
05-09-2012, 09:24 AM
Replies: 28
Views: 7,796
Posted By apexi_bb6

Re: Wouldn't you like a 6th gear?

If your car is stock or lightly modded (intake, header, exhaust, tune) and you are paying someone to remove the trans, install the gear, and re install trans then it would take years to offset the...
Forum: Honda Prelude
05-08-2012, 06:50 PM
Replies: 28
Views: 7,796
Posted By apexi_bb6

Re: Wouldn't you like a 6th gear?

Machining was required for the SH/5th gen? Was it enlarging the bore of the gearset or shaving the thickness down?

And btw hows the motor issues going?
Forum: Honda Prelude
05-04-2012, 02:30 PM
Replies: 900
Views: 177,479
Posted By apexi_bb6

Re: All Time Fastest Preludes NA/Turbo Ladder

I like the 15 second 1/4 out of the f22, gives me some hope for the future setup thats milling around in my head. After the 5th gen is done I want to start a low budget non vtec build for a 3rd gen...
Forum: Honda Prelude
05-04-2012, 11:45 AM
Replies: 28
Views: 7,796
Posted By apexi_bb6

Re: Wouldn't you like a 6th gear?

Wouldnt be worth it if I was paying someone, about 100 bucks shipped for a trans that is already out of the car, and quieter highway speeds (3" exhaust). I think it will be worth it for me.

I...
Forum: Honda Prelude
05-04-2012, 07:45 AM
Replies: 28
Views: 7,796
Posted By apexi_bb6

Re: Wouldn't you like a 6th gear?

f23 5 speed gearset into h23 tranny (https://honda-tech.com/forums/showthread.php?t=2411948)

This is what Im planning on, bought 5th ggearset out of a 98 accord I believe, mabey older dont have my...
Forum: Honda Prelude
05-03-2012, 02:42 PM
Replies: 5
Views: 2,411
Posted By apexi_bb6

Re: 4th gen standard air box question

If nothing else tuck it into the fender well, plenty of room if the resonator is gone.
Showing results 1 to 25 of 91
 
Page 1 of 4
1
2
3
Last »


 
Forum Jump


All times are GMT -8. The time now is 11:38 AM.