Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: DVDr
Showing results 1 to 25 of 497
Search took 0.61 seconds.
Forum: Engine Management and Tuning
04-03-2024, 07:00 AM
Replies: 1
Views: 169
Posted By DVDr

Re: P06 ECU Data log

Hey, To Enable full datalogging

USDM ecus:

Remove J12

JDM ecus:

Remove J4
https://help.hondatuningsuite.com/Datalogging1.html
Forum: Engine Management and Tuning
04-02-2024, 07:26 PM
Replies: 4
Views: 294
Posted By DVDr

Re: T1 style cam only trigger vs cam + crank trigger setup

It's what you said, you can get some slop in belt/chain .

Taken from internetzz :

It is because the timing chain or timing belt always has a little give and this can obscure the movement of...
Forum: Engine Management and Tuning
04-01-2024, 01:13 PM
Replies: 3
Views: 325
Posted By DVDr

Re: Trigger settings for Fueltech ECU using T1 trigger kit

Did you have any luck touching base with Fueltech support, they have always provided top notch responses ? .

Delacruz has a great details on the setup.

...
Forum: Engine Management and Tuning
04-01-2024, 01:03 PM
Replies: 4
Views: 294
Posted By DVDr

Re: T1 style cam only trigger vs cam + crank trigger setup

What ecu did you have in mind. Are you talking about their cam and crank trigger kit. I think it fantastic and the way to go if you have the option. ( Any aftermarket stand alone will work with this...
Forum: Engine Management and Tuning
03-20-2024, 12:59 PM
Replies: 2
Views: 227
Posted By DVDr

Re: help 2002 honda 2.3 Engine Management and Tuning help

Are you running a completely stock ECU ? Has it been flashed.

Do you have any check engine lights.

#1 thing I would do is a get an OBD reader and scan ecu to see if there is any faults.
Forum: Engine Management and Tuning
03-20-2024, 12:56 PM
Replies: 2
Views: 185
Posted By DVDr

Re: What ecu should I use for my 97 b20b vtech turbo

Do you have budget in mind. Is there a tuner near by . I usually start off with : reach out to your local tuner's and see what they like/use and is within your budget.

Right now there is a...
Forum: Hybrid / Engine Swaps
03-19-2024, 06:37 AM
Replies: 4
Views: 272
Posted By DVDr

Re: 2000 Ek B Swap throwing p1337 and p1298

#1) would be tackle the CKF sensor issue. When installing the oil pump, you made sure everything was from the obd2 ( you need the ring gear with teeth and the sensor ) .

if you have all the parts,...
Forum: Forced Induction
03-18-2024, 10:38 AM
Replies: 4
Views: 284
Posted By DVDr

Re: Bigger injectors installation

Yes, that should do it .

I dont have personally experience with the F20A7 , but it's the same for the F20b. So you should be on the right path .
Forum: Forced Induction
03-18-2024, 06:19 AM
Replies: 4
Views: 284
Posted By DVDr

Re: Bigger injectors installation

Hey,

the B/H/D family is usually a 14mm bottom with a 10mm top ( fuel rail ) . The injectors you got are 14mm bottom with 14mm top, you will need to buy an adapter as you noted, then play with the...
Forum: Honda Civic / Del Sol (1992 - 2000)
03-11-2024, 05:14 PM
Replies: 2
Views: 597
Posted By DVDr

Re: OB2A d16y7 stock wire harness to OB2A Vtec Engine & manifold

The easiest cheat way is to run the missing wires separately outside the main harness to directly to the ecu . Use the OBD2A pin out and run wires to those pin outs .

Easiest way , is find a D16y8...
Forum: For Sale
03-11-2024, 04:58 PM
Replies: 2
Views: 324
Posted By DVDr

FS: OBD2 P75 ECU b18b

Hello,

Have for sale 2 OBD2A P75 Ecus out of an Integra with B18b . I used these on past B18b and B20 swaps . They are virgin with no mods or flashes.

$ 100 each shipped...
Forum: Engine Management and Tuning
03-11-2024, 04:50 PM
Replies: 2
Views: 243
Posted By DVDr

Re: 98 civic runing hella rich.

I agree with JR, check the map sensor.

You do have the correct ecu, and being obd2, chances are it is not reflashed and you are on base map. This is good.

You can now follow the oem steps;
...
Forum: Meets & Events
02-28-2024, 11:45 AM
Replies: 1
Views: 537
Posted By DVDr

Re: JDM B20 High comp w ITR head B20VTEC

Dynos for similar setups have ranged from 185 to 200 ish HP ( but 220 hp on ITR is also very high, so maybe add some hp inflation onto my noted numbers ). Usually when swapping to ITR style 84mm...
Forum: Engine Management and Tuning
02-28-2024, 11:41 AM
Replies: 1
Views: 270
Posted By DVDr

Re: AEM Infinity

100 % , AEM Infinity is a great ecu . Tons of items out there. Would I drop 10K in brand new environment ( ECU / Dash / GPS ) , probably not. If you can find a sale or deal. Yes, they work great.
...
Forum: Engine Management and Tuning
02-17-2024, 12:24 PM
Replies: 17
Views: 478
Posted By DVDr

Re: Aem Infinity

Its 4 wires, you can track them down on your harness and put a connector or solder :

T1 to AEM Pin 1 - Ground

Pin 2 - Cam trigger output

Pin 3 - Crank trigger output

Pin 4 - 8-16 volt...
Forum: Engine Management and Tuning
02-16-2024, 10:08 PM
Replies: 17
Views: 478
Posted By DVDr

Re: Aem Infinity

I will add these 2 cents.
- Sell the retrofit kit - Keep your coils most of the wiring
- Run everything of the AEM as has been noted and diagramed for you above.

I have had mixed experiences...
Forum: Engine Management and Tuning
05-02-2023, 04:49 PM
Replies: 23
Views: 25,079
Posted By DVDr

Re: anyone here run megasquirt?

Taken from the following link : DIYAUTOTUNELINK (https://www.diyautotune.com/support/tech/install/honda/megasquirt-your-honda/)

from DIYAUTOTUNE. How to MegaSquirt Your Honda or AcuraIf you...
Forum: Engine Management and Tuning
05-02-2023, 04:47 PM
Replies: 23
Views: 25,079
Posted By DVDr

Re: anyone here run megasquirt?

Honda's OEM distributor for D/B/H/F series was VR sensors . ( K series uses Hall ) .

Go through this article, it details the steps to get everything working for your specific MS setup as there...
Forum: Engine Management and Tuning
05-02-2023, 11:02 AM
Replies: 23
Views: 25,079
Posted By DVDr

Re: anyone here run megasquirt?

What wiring are you looking at and for what motor setup .

you need to know :

Signal / sensors used for pick up ; using crank pick up and cam home signal ( for B/F series ) or using the OEM...
Forum: Engine Management and Tuning
03-29-2023, 03:49 AM
Replies: 4
Views: 275
Posted By DVDr

Re: need help choosing motor

The easiest option would be K24, you can get ruining with a simple stand alone ( like a Fueltech FT450 ) which is also your dash.

K24s are being dropped into everything due to their ease of...
Forum: Engine Management and Tuning
03-15-2023, 01:29 PM
Replies: 1
Views: 282
Posted By DVDr

Re: 16a1 to b18c

you can use the B16 harness no issues.
Forum: Engine Management and Tuning
03-14-2023, 02:34 PM
Replies: 1
Views: 392
Posted By DVDr

Re: b18c1 gsr obd2 to obd1 tuning ?s

First, dont use the 4 bar map for stock B18c1 , find/buy oem style map sensor and what size is Throttle body, might be easier to start the swap with your current TB , having to big of TB will require...
Forum: Engine Management and Tuning
03-14-2023, 02:26 PM
Replies: 2
Views: 695
Posted By DVDr

Re: B18c type R tuning need help

Hey Brian, Most people start of tuning the JDM B18c with that map. Make sure you set timing before anything. ( you can do it oem style, with jumper and by hand ) . I would recommend getting Honda...
Forum: Engine Management and Tuning
03-14-2023, 09:23 AM
Replies: 22
Views: 1,409
Posted By DVDr

Re: Recommended stand alone system for simple build

Amazing small world ! . I lived in the Caribbean for years, Love me Trinidad and Tobago and Isla de Margarita ! .

Regarding motors, I would pick it up in Montreal, they can ship it to for you as...
Forum: Engine Management and Tuning
02-28-2023, 08:14 AM
Replies: 22
Views: 1,409
Posted By DVDr

Re: Recommended stand alone system for simple build

https://www.holley.com/products/fuel_systems/fuel_injection/aem_efi/parts/30-7114
...
Showing results 1 to 25 of 497
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 10:17 PM.