Honda-Tech - Honda Forum Discussion

Notices
 
Page 1 of 20
1
2
3
11
Last »
Search: Posts Made By: The sweed
Showing results 1 to 25 of 493
Search took 1.26 seconds.
Forum: Drag Racing
01-01-2021, 08:00 AM
Replies: 198
Views: 63,364
Posted By The sweed

Re: Gator Axles VS Drive shaft shop.

I bought a set of gator axles from fast turbo in florida a long time ago.. They were stage 3 or 5 or something and rated to 650hp and had a bigger outer cv spline and needed the accord here in europe...
Forum: Honda Prelude
12-31-2020, 05:31 AM
Replies: 8
Views: 1,013
Posted By The sweed

Re: axles

I bought a set of gator axles from fast turbo in florida a long time ago.. They were stage 3 or 5 or something and rated to 650hp and had a bigger outer cv spline and needed the accord here in europe...
Forum: Forced Induction
09-05-2019, 11:58 AM
Replies: 62
Views: 58,485
Posted By The sweed

Re: Garrett G Series Turbo - Competitor to the Borg-Warner EFR series or no?

As I read it to get 900hp out of the g35 900 you have to reach that at 1,5 bar.. Thatīs a v8 turbo. If you rev the turbo above 145000 rpm its another story but thats outside the compressor map and...
Forum: Forced Induction
09-04-2019, 07:58 AM
Replies: 62
Views: 58,485
Posted By The sweed

Re: Garrett G Series Turbo - Competitor to the Borg-Warner EFR series or no?

Found this today.. I have been waiting on the g35 series but it looks like they wont like much pressure ratios.. What you guys think..
...
Forum: Forced Induction
06-20-2019, 02:22 AM
Replies: 9
Views: 3,166
Posted By The sweed

Re: How much power gt35 b16 8psi?

It depends on the rest of the setup. The wastegate outlet design, wastegate size and exhaust houseing.

I have a 84,5mm bore b16 with full-race ramhorn with a 90deg wastegate exit, ITR cams, some...
Forum: Forced Induction
05-11-2019, 10:25 PM
Replies: 30
Views: 5,026
Posted By The sweed

Re: GT35R to GTX35R - Made Less Power w/ Better Turbo

This sounds like fuel is not getting to your fuel pickup in hard turns.. If you have a wideband and do a datalog it will show lean when that happens. The fix is a fuel catch can.
If this happens...
Forum: Forced Induction
04-27-2019, 12:14 AM
Replies: 30
Views: 5,026
Posted By The sweed

Re: GT35R to GTX35R - Made Less Power w/ Better Turbo

Did you degree the new cams.. There are rumors that they changed centerline position on the newer pro1 cams so if you have had old ones the new ones needs to be degreed.
Forum: Forced Induction
01-26-2019, 04:11 AM
Replies: 19
Views: 1,348
Posted By The sweed

Re: EK B16 exhaust manifold for road race suggestions - need to cool things down!

Yes roadracing a half rad with FI is kind of hard.. I have tested a few.. and koyo race version was the best one. A hi flow fan like the 13" spal that draws something like 20A is not to be confiused...
Forum: Drag Racing
01-06-2019, 10:43 AM
Replies: 15
Views: 12,246
Posted By The sweed

Re: AWD Civic EF

If you skip a center diff solution I would think that the transfer case and drive/bell housing will take alot more beating and just looking at it I doubt it will hold. But I would love it if it will...
Forum: Forced Induction
10-15-2018, 08:46 AM
Replies: 189
Views: 57,608
Posted By The sweed

Re: Terance's 600hp Street/Track Build

I use those type of pneumatic fittings in some places and I have experianced that they canīt deal to good with heat ad therefor leak.. But as long as they donīt get exposed to to much heat I have not...
Forum: Forced Induction
10-13-2018, 11:09 PM
Replies: 189
Views: 57,608
Posted By The sweed

Re: Terance's 600hp Street/Track Build

Are you talking of a MAP sensor now? The turbo doesnīt create any vaccum..

But the question was how takeing boost from the turbo outlet for the wastegate and boost controll effects boost creep or...
Forum: Forced Induction
10-13-2018, 06:21 AM
Replies: 20
Views: 2,667
Posted By The sweed

Re: Ram horn, tear drop wastegate size on 61 lbs+turbos?

It involves changeing alot of other stuff.. Intercooler,,bumper, oilcooler and hoses dumptube (wich I made so I can route it into the downpipe or under the car with v-bands), and I need to buy a...
Forum: Forced Induction
10-12-2018, 02:57 PM
Replies: 20
Views: 2,667
Posted By The sweed

Re: Ram horn, tear drop wastegate size on 61 lbs+turbos?

The whole setup I custom made myself accept the full race manifold that I bought straigt from Geoff him self the owner of full race when I took a roadtrip in US along time ago.. Everything is a real...
Forum: Forced Induction
10-12-2018, 07:07 AM
Replies: 20
Views: 2,667
Posted By The sweed

Re: Ram horn, tear drop wastegate size on 61 lbs+turbos?

I can do the work myself. I have my own shop and a good ac/dc tig mashine. What I lack is time and money. I know my creep issue will be better with a tear drop and the new gen5 50mm turbosmart gate...
Forum: Forced Induction
10-10-2018, 08:51 PM
Replies: 20
Views: 2,667
Posted By The sweed

Re: Ram horn, tear drop wastegate size on 61 lbs+turbos?

I am familar with how to make it better if cost time and space was not an issue.. I have no space to use an old 46mm straight on the collector without the 90deg bend since this motor is fitted in a...
Forum: Forced Induction
10-10-2018, 02:11 PM
Replies: 189
Views: 57,608
Posted By The sweed

Re: Terance's 600hp Street/Track Build

The Shodan please explain why it matters if you use turbo compressor outlet as boost sorce for the wastegate?
Forum: Forced Induction
10-10-2018, 01:21 PM
Replies: 20
Views: 2,667
Posted By The sweed

Re: Ram horn, tear drop wastegate size on 61 lbs+turbos?

yeah.. sorry ha ha.. I will try to make it more clear.

I ran the car without wastgate spring to see how low boost I can run. And how bad my setup creeps. I was thinking maybe it would creep and...
Forum: Forced Induction
10-10-2018, 09:37 AM
Replies: 20
Views: 2,667
Posted By The sweed

Ram horn, tear drop wastegate size on 61 lbs+turbos?

I have one of the earliest full-race ramhorn manifolds on my 84mm b16 vtec with a gt35r. It has NO tear drop design and is just a 90 deg 46mm port out the collector. I changed the flange and have a...
Forum: Forced Induction
09-30-2018, 04:38 AM
Replies: 62
Views: 6,187
Posted By The sweed

Re: Opinions requested: B16a gt3582 and pro 1 cams. Mid range & top-end possible?

Anything that will increase over all power will increas spool also.. A b16 can rev to the moon if supported properly. What is mid range is subjective.. A b16 reving to 10 000 and midrange is...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-18-2018, 05:09 AM
Replies: 7
Views: 4,250
Posted By The sweed

Re: lower ball joint fits lca too loose ?

I found the old spindles with stock balljoints so I could compare.. I got from a civic -92 and a civic -88. The ball joint is different.. I canīt see that the angle of the tapper is different but the...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-16-2018, 11:32 PM
Replies: 7
Views: 4,250
Posted By The sweed

Re: lower ball joint fits lca too loose ?

I would deffinitely go for oem ones if I didnīt want the extended roll center adjusters.
It seems to be hard race ball joints I have trouble with.

m factory
hard race
buddy club

To me those...
Forum: Honda CRX / EF Civic (1988 - 1991)
08-16-2018, 01:24 AM
Replies: 7
Views: 4,250
Posted By The sweed

Re: lower ball joint fits lca too loose ?

Raising this old thread.. I have the same problem.. I have an old project civic -88 hatch and I THINK I have m factory extended ball joint.i donīt remember.. It could be a hard race set too.

Me...
Forum: Forced Induction
07-19-2018, 11:32 PM
Replies: 42
Views: 5,397
Posted By The sweed

Re: Moroso Oil pan 20911 & Factory OEM pans:Is the fact that some come warped accepta

I have a moroso steel pan with baffles, trap doores and a kick out.. Donīt remember the part nr.

My major issue is all the splatter from the welding.. Just scraping with a knife made it come...
Forum: Forced Induction
07-14-2018, 05:02 AM
Replies: 19
Views: 3,608
Posted By The sweed

Re: Possible head gasket issue, I am stumped - turbo b16

Dont drive with the overflow tank emty.. The motor sucks coolent back in and out when the water expands and shrinks during heat cykles.. The most likely would be a leak somewhere.. A common place is...
Forum: Forced Induction
06-10-2018, 09:45 PM
Replies: 44
Views: 18,899
Posted By The sweed

Re: GSC T1 and the usage of Spring Style LMA's *PLEASE NOTE BEFORE INSTALLING*

As far as I can see the lash has nothing to do with this.. If it would the cam would look more the same all around.. I think that something happens that makes the LMA not to be able to handle the...
Showing results 1 to 25 of 493
 
Page 1 of 20
1
2
3
11
Last »


 
Forum Jump


All times are GMT -8. The time now is 02:19 PM.